- Fanless and silent
Passive cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free - Chassis
Dimensions without Stand: 25.2 x 16.2 x 3.85 cm (DxHxW) = 1.57 L
Hole for the Kensington Lock at the back panel
Optional accessory: 75mm and 100mm VESA mounting kit (PV01) - Operation System
This system comes without operating system.
It is compatible with Windows 7 (32 oder 64 bit) - Processor
Intel Dual Core Atom processor D2550 (Codename: Cedarview)
Intel Hyper-Threading technology: 2-threads per core
32 nm manufacturing process, Micro-FCBGA11 package
Intel 64 architecture, Core clock: 1.86 GHz
L2 Cache: 1024kB , TDP: max. 10W
Supports SSE2, SSE3, SSSE3, Execute Disable Bit
Integrated North Bridge with controller for memory and graphics - Passive cooling without fan
Passive, completely fanless cooling through convective heat transfer
Warning: Please make sure the system is always placed
upright using either its stand or the optional VESA mount.
Ventilation holes must not be blocked to ensure sufficient cooling. - Chipset
Intel® NM10 Express Chipset (south bridge)
Platform Controller Hub (PCH)
Code name: Tiger Point - BIOS
AMI BIOS in a 8Mbit Flash ROM supports PnP, ACPI 2.0
Supports external USB flash memory card boot up
Supports Power fail resume / AC power on state / always on / always off
Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states
Supports Unified Extensible Firmware Interface (UEFI) - Memory
2 GB DDR3-1333 SO-DIMM memory (at DDR3-1066 speed)
Supported maximum capacity: 4 GB - Hard disk drive
320 GB 2.5" Serial ATA hard disk - Discrete AMD Graphics
AMD Radeon™ HD 7410M graphics processor (Codename "Seymore-LP")
Dedicated 3D graphics card
VRAM: 512MB DDR3, 800MHz, 64 bit (no shared memory)
160 Stream Processing Units, 40nm technology
Supports DirectX 11, Shader Model 5.0, OpenGL 4.1
Unified Video Decoder (UVD 3) dedicated video playback accelerator
Supports full HD decode (1080i/p)
Support for up to 2 simultaneous displays:
1) Digital HDMI™ 1.4a, max. resolution: 1920x1200
2) Analog D-Sub VGA, max. resolution: 2048x1536
Supports Extended Desktop Mode and Clone Mode
Integrated HD audio controller for 7.1 Surround Sound via HDMI.
Supports AC-3, AAC, Dolby TrueHD and DTS Master Audio formats. - Integrated Audio
IDT92HD81 Audio Codec with Azalia support
Two analog audio connectors (3.5mm):
1) Line out (head phone)
2) microphone input - Card Reader
Integrated card reader supports SD, SDHC and SDXC memory flash cards - Wired Network
RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.
Network controller Realtek RTL8411
Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states - Wireless Network (WLAN)
Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream
Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i
Half size Mini-PCIe-Card - Connectors
HDMI v1.4a digital video and audio output
D-Sub/ VGA analog video ( 15 pin)
5x USB 2.0 (1x front, 4x rear)
Gigabit network (LAN, RJ45)
Audio Line-out (head phone)
Microphone input
DC input for the external power adapter - LEDs and Buttons
Power button
Power LED (white)
Hard disk LED (blue) - Power supply
External 40W AC/DC power adapter (fanless), 19V / 2.1A
AC Input: 100~240V AC, 50~60Hz
Automatic voltage adjust
Dimensions: 89.5 x 37 x 26.5 mm (LWH)
DC Connector: 5.5/2.5mm (outer/inner diameter) - Optional Accessories
- VESA mount made of metal (PV01)
- Adapter for second 2.5" drive instead of optical drive (PHD2N) - Environmental Spec
Operating temperature range: 0~35°C
Relative humidity range: 10~90% (non-condensing) - Certification and Compliance
EMI: CE, FCC, BSMI, C-Tick, CCC
Safety: CB, BSMI, ETL
Other compliances: RoHS, Eup Lot6
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
