- Fanless and silent
 Passive cooling, no fan noise at all
 Perfect to be used in noise-sensitive environments
 Fanless, dust-free and thus virtually maintenance-free
- Low power consumption
 Power consumption: ca. 16W (idle mode) and ca. 25W (full load)
- Chassis
 Dimensions without Stand: 20 x 16 x 3.6 cm (DxHxW) = 1.15 litres
 Weight: 1.6 kg net, 2.3 kg gross
 Hole for the Kensington Lock at the back panel
 Optional accessory: 75mm and 100mm VESA mounting kit (PV03)
- Operation System
 Microsoft Windows 7 Home Premium or Professional, 32 bit version
 6 languages available: German, English, French, Dutch, Italian, Spanish, Danish
- Processor
 Intel Dual Core Atom processor D2700 (Codename: Cedarview)
 Intel Hyper-Threading technology: 2-threads per core
 32 nm manufacturing process, Micro-FCBGA11 package
 Intel 64 architecture, Core clock: 2.13 GHz
 L2 Cache: 1024kB , TDP: max. 10W
 Supports SSE2, SSE3, SSSE3, Execute Disable Bit
 Integrated North Bridge with controller for memory and graphics
- Passive cooling without fan
 Passive, completely fanless cooling through convective heat transfer
 Warning: Please make sure the system is always placed
 upright using either its stand or the optional VESA mount.
 Ventilation holes must not be blocked to ensure sufficient cooling.
- Chipset
 Intel® NM10 Express Chipset (south bridge)
 Platform Controller Hub (PCH)
 Code name: Tiger Point
- BIOS
 AMI BIOS in a 8Mbit Flash ROM supports PnP, ACPI 2.0
 Supports external USB flash memory card boot up
 Supports Power fail resume / AC power on state / always on / always off
 Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states
 Supports Unified Extensible Firmware Interface (UEFI)
- Memory
 2 or 4 GB DDR3 SO-DIMM memory
- Hard disk drive
 SATA hard disk or SSD in 6.35cm/2.5" format
- Integrated Graphics
 The Graphics Processing Unit (GPU) is integrated into the processor
 Intel GMA 3650, Graphics Base Frequency: 640 MHz
 Supports DirectX 9
 Maximum shared memory: 8MB pre-allocated
 plus 384MB Video Memory Technology (DVMT)
 Three video outputs: HDMI v1.3, DVI-D and D-Sub (VGA)
 Two outputs can be used at the same time.
 Supports dual display in clone or extended mode.
 HDMI and DVI support the Intel HDCP function
 (High bandwidth Digital Content Protection)
 HDMI/DVI display resolution up to 1920x1200.
- Integrated Audio
 IDT92HD81 Audio Codec with Azalia support
 Two analog audio connectors (3.5mm):
 1) Line out (head phone)
 2) microphone input
- Card Reader
 Integrated card reader supports SD, SDHC and SDXC memory flash cards
- Wired Network
 RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.
 Network controller JMC 251
 Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states
- Wireless Network (WLAN)
 Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream
 Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i
 Half size Mini-PCIe-Card
- Connectors
 HDMI v1.3 digital video and audio output
 DVI-D digital video output
 D-Sub/VGA analog video (15 pin)
 5x USB 2.0 (1x front, 4x rear)
 Gigabit network (LAN, RJ45)
 Audio Line-out (head phone)
 Microphone input
 2x RS232 Serial Ports at the front panel
 DC input for the external power adapter
- LEDs and Buttons
 Power button
 Power LED (white)
 Hard disk LED (blue)
- Power supply
 External 40W AC/DC power adapter (fanless), 19V / 2.1A
 AC Input: 100~240V AC, 50~60Hz
 Automatic voltage adjust
 Dimensions: 89.5 x 37 x 26.5 mm (LWH)
 DC Connector: 5.5/2.5mm (outer/inner diameter)
- 24/7 nonstop operation
 This device is approved for 24/7 permanent operation.
 Requirements:
 - Free circulation of air amongst the PC must be guaranteed.
 - Ventilation holes must be clear.
 - If a hard disk is installed, this must also be approved for permanent
 operation by its manufacturer (max. one hard disk)
- Environmental Spec
 Operating temperature range: 0~35°C
 Relative humidity range: 10~90% (non-condensing)
- Certification and Compliance
 EMI: CE, FCC, BSMI, C-Tick, CCC
 Safety: CB, BSMI, ETL
 Other compliances: RoHS, Eup Lot6
 This device is classed as a technical information
 equipment (ITE) in class B and is intended for use in
 living room and office. The CE-mark approves the
 conformity by the EU-guidelines:
 - EMV-guideline 89/336/EWG electromagnetic tolerance
 - LVD-guideline 73/23/EWG use of electric devices
 within certain voltage-limits

 
	
		






