- Chassis
Nettop PC with black chassis made of metal
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35 litre
Weight: 1.3 kg net and 2.1 kg gross
Two holes for Kensington Locks and numerous
threaded holes (M3) at both sides of the chassis - Operation System
This system comes without operating system.
It is compatible with
- Windows 10 (64-bit) and
- Linux (64-bit)
Note: Windows 7 and 8.1 is only supported in combination with the 6th generation Intel Core processors "Skylake".
Additional note on Windows 7 see [6] - Mainboard / Chipset / BIOS
Chipset: IntelŪ H110 Chipset
(IntelŪ DH82H110 PCH, code name "Sunrise Point")
Platform Controller Hub (PCH) as Single-Chip-Solution
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure [8] - Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, 4.74 A, max. 90 W
DC Connector: 5.5/2.5mm (outer/inner diameter)
Remark: the DC-input of the computer supports an external power source with either 12Vą5% or 19Vą5%. - Processor
Intel Core i3-7100 processor with Socket LGA 1151 (H4)
7th generation, code name "Kaby Lake"
Maximum processor power consumption (TDP) = 51 W
14nm process technology, up to 3 MB of L3 cache
CPU clock frequency: 3.9 GHz
Number of CPU cores: 2
Number of threads: 4 (supports Hyper-Threading) - Processor cooling
Heat-pipe processor cooling with two 60 mm fans on the upper side of the chassis - Memory support
4 GB DDR3L-1600 (PC3-12800) SDRAM with 1.35V
SO-DIMM format with 204 pins
Supports max. 16 GB per DIMM, maximum total size of 32 GB - Integrated Graphics
Intel HD Graphics 630
Graphics Base Frequency: 350 MHz
Graphics Max Dynamic Frequency: 1100 MHz
Supports DirectX 12, OpenGL 4.4, Intel Quick Sync Video
This PC comes with three graphics ports,
but two can be used at the same time.
Two digital video outputs: DisplayPort 1.2 and HDMI 1.4
- supports two independent Full HD displays simultaneously [3]
- supports Full HD resolution at 1920x1200 (1080p/60Hz)
- supports 4K UHD resolution at 3840 x 2160 (max. 2160p/60Hz on DP or max. 30Hz on HDMI) [4]
- supports Blu-ray (BD) playback with HDCP
- supports HD video plus multi-channel digital audio via a single cable.
One analog video output: D-Sub/VGA - M.2-2260 BM Slot
The M.2 2260 BM slot provides the following interfaces:
- PCI-Express v2.0 X4
- SATA v3.0 (6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42 or 60 mm (type 2242, 2260).
Cards with 80mm length (2280) are not supported.
Supports M.2 SSD cards with PCIe or SATA interface. - M.2-2230 AE Slot
The M.2 2230 AE slot provides the following interfaces:
- PCI-Express v2.0 X1
- USB 2.0
It supports M.2 cards with a width of 22 mm and a length of 30 mm. This slot is intended for Wireless LAN (Wifi), Bluetooth, GSM/UMTS cards and others. A SATA interface for SSD cards is not available here. - Audio
Audio RealtekŪ ALC 662 5.1 channel High-Definition Audio
Two analog audio connectors (3.5mm) at the front panel:
1) 2-channel line out (head-phones)
2) microphone input
Digital multi-channel audio output: by HDMI and DisplayPort - Dual Gigabit LAN Controller
Dual network with two RJ45 ports
Used network chips:
1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
2) Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode [9] - SSD Drive
120 GB SSD storage in 6.35 cm / 2.5" format
Serial-ATA III interface, max. 6 Gb/s (600 MB/s) data transfer rate - Card Reader
Integrated card reader
Supports SD, SDHC and SDXC memory flash cards
Supports boot up from SD card - Front Panel connectors
Microphone input
Audio Line-out (headphone)
2x USB 3.0
2x USB 2.0
SD card reader
Power button
Power LED (blue)
HDD LED (yellow) - Back Panel connectors
1x HDMI connector [1]
1x DisplayPort connector (DP) [2]
1x D-Sub VGA connector
2x USB 3.0
1x eSATA/USB 2.0 combo
2x Gigabit LAN (RJ45)
1x RS232 serial port, 9-pin D-Sub (5/12V, RS422/RS485) [3]
DC-input connector for external power adapter (supports 12Vą5% or 19Vą5%)
4-pin connector (2.54 mm pitch) supports
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
1x PS/2 Combo supports keyboard or mouse
2x Perforation for optional Wireless LAN antennas
2x hole for Kensington Locks - Other onboard connectors
1x jumper for power on after power fail (hardware solution) [8]
2x serial interface (COM), 1x occupied
1x fan connector (4-pin) occupied by the cooling system
1x connector for CMOS battery (occupied) - Supplied Accessories
Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
Driver DVD (Windows 64-bit)
COM port adapter [5]
VESA mount for 75/100mm standard (two metal brackets)
Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to affix VESA mount on the PC)
Four screws M3 x 4 mm (to mount a 2.5" storage device into the bay)
External 90W power adapter with power cord - Optional Accessies:
WLN-M. WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0
PS02: Stand for vertical operation - Environmental Specifications
Operating temperature range: 0~50 °C [7]
Relative humidity, non-condensing: 10~90% - Low Power Consumption
Exemplary measurement of the power consumption:
- S3 mode: 0.81W
- Idle mode: 9.9W
- Full load: 61.5W / 79.6W (without/with graphics)
Configuration: Core i5-6600, 2x 4GB DDR3L-1600, 500GB SSD, Windows 7 64 bit - Certifications / Compliance::
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star, ErP - Conformity
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
Footnotes:
[1] HDMI output supports DVI-D with optional adapter
[2] How to convert DisplayPort into HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either through DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[3] Serial Port
Pin 9 of the D-Sub COM-Port is a multi-functional signal. Based on the Jumper JP1 configuration on the mainboard, it can be configured as Ring Indicator (RI) or external power supply with a voltage level of either 5V or 12V. Each COM port can be configured separately. The maximum current is 500 mA.
[4] 4K Ultra-HD resolution
A 4K-display with Ultra-HD resolution (3840 x 2160) should only be connected via DisplayPort, as only this port supports a higher refresh rate of 60Hz. Certain displays (e.g. Dell UP2414Q) however require MST mode (Multi-Stream Transport) to be enabled which sends two separate images at half resolution each to the display. These two images are then combined and put in correct order by the Intel graphics driver when in Collage mode. Please note that HBR2-mode (High Bit Rate 2) must be supported by each display to have more than one of them run at 4K resolution.
[5] Second COM port possible
An adapter cable for a second serial COM port (RS232) is provided in the scope of delivery. You can dismount the VGA port (in case you don't need it) and install a second COM port instead.
[6] Why may PS/2 and eSATA ports help install Windows 7?
The IntelŪ 100 chipset series has done away with support of the Enhanced Host Controller Interface (EHCI) which is the driver software for the USB 2.0 ports. This new chipset only supports the updated Extensible Host Controller Interface (xHCI for USB 3.0) which is not supported by the original Windows 7 installation disk. This means, that peripheral devices connected by USB (like a keyboard, a mouse or an external optical drive) will not work during Windows 7 Installation. There are two solutions: (1) use a PS/2 keyboard or a PS/2 mouse and connect an external DVD drive via eSATA or (2) add the required USB 3.0 drivers to the Windows 7 installation files - this procedure is explained in the Shuttle FAQ section at global.shuttle.com.
[7] Notice - operating temperature
For high ambient temperatures over 40°C we strongly recommend to use SSDs (supporting at least 70°C) and rugged SO-DIMM memory modules with a temperature range of up to 95°C.
[8] Power on after power fail
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the DH110 also comes with a hardware-based solution. By removing Jumper JP2 (on the mainboard behind the power button) the system will start unconditionally once power is supplied.
[9] Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter. The benefit of this approach is that it enables load balancing and failover.
Driver download: https://downloadcenter.intel.com/download/21642
