- Fanless and silent
Passive cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free - Low power consumption
Power consumption: idle: 10-11W, full load: 22-30W (without/with graphics)
(measured with 2x 2GB SO-DIMM, 500 GB 2.5" hard disk) - 24/7 nonstop operation
This device is approved for 24/7 permanent operation.
Requirements:
- Free circulation of air amongst the PC must be guaranteed.
- Ventilation holes must stay clear.
- If a hard disk is installed, this must also be approved for permanent operation by its manufacturer - Chassis
Slim-PC (Nettop) with black chassis made of steel
Without cooling fan, passive cooling only
The bays for memory, 2.5" drives and Mini-PCIe cards
can be easily accessed by removing two cover plates.
Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres
Weight: 1.43 kg net and 2.13 kg gross
Two holes for Kensington Lock and numerous
threaded holes (M3) at both sides of the chassis - Operation Position:
1) Device must only be used in vertical position with the DVI port facing up
2) Please make sure to use either the supplied feet or the VESA mount - Operation System
This system comes without operating system.
It is compatible with Windows 8, Windows 7, Windows XP and Linux
Supports 32 and 64 bit. - Processor
Model: Intel Celeron 1037U (ULV)
Code name: Ivy Bridge (3rd Gen. Core)
Cores / Threads: 2 / 2
Clock rate: 1.8 GHz
L1/L2/L3 cache: 128 kB / 512 kB / 2048 kB
Memory controller: DDR3-1333/1600 Dual Channel
TDP wattage: 17 W maximum
Manufacturing process: 22 nm
Socket: FCBGA1023
Enhanced SpeedStep technology
Maximum Tjunction Temperature: 105°C
Integrated Intel HD graphics engine
Supports 64 Bit, VT-x with EPT, Enhanced SpeedStep, NX bit, SSE4 - Storage
60 GB Solid State Disk (SSD)
6.35cm / 2.5" form factor
SATA interface - Memory
4 GB DDR3 SO-DIMM memory
Maximum total size of 16 GB - Integrated graphics
Intel HD graphics
Clock rate: 350~1000 MHz
Maximum resolution: 1920x1200 (analog or digital)
Execution Units (EU): 6
Supports two independent screens
Supports DirectX 11.1, OpenGL 4.0
Supports full AVC/VC1/MPEG2 hardware decoding
HDMI supports HD video plus multi-channel digital audio via a single cable - Mainboard / Chipset / BIOS
Shuttle Mainboard FS47
All capacitors are high quality solid capacitors
Chipset: Intel® NM70 Express
Supports resume after power failure [6]
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports boot from USB devices and SD card reader
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI) [1] - Power Adapter
External 65 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
DC Connector: 5.5/2.5mm (outer/inner diameter) - Mini PCIe Slots
Two Mini PCI Express expansion slots: full size and half size
1) the half size slot is occupied with a WLAN module
2) the full size slot supports PCIe 2.0, SATA 3G and USB 2.0
and can either be used for a Mini-PCIe card or
for a Mini SATA (mSATA) flash memory card [3]
Please use the "Mini-PCIE / mSATA Select" function in the BIOS setup. - Audio
Audio Realtek® ALC 662 High-Definition Audio (5.1 channel)
Two analog audio connectors (3.5mm) at the back panel:
1) 2 channel line out (head phone)
2) microphone input
Digital multi-channel audio output: via HDMI - Dual Gigabit LAN Controller
Dual Realtek 8111G Ethernet network controller (Gigabit)
Supports 10 / 100 / 1.000 MBit/s operation
With two RJ45 ports (dual network) supports Teaming [2]
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE) - Wireless Network (WLAN)
Built-in Mini-PCIe WLAN card (half size) and internal antenna
Single-Chip 1T1R WLAN Controller Realtek RTL8188CE
Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream
Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i - Card Reader
Integrated SD card reader
Supports SD, SDHC and SDXC memory flash cards
Supports boot up from SD card - Front Panel connectors
4x USB 2.0
2x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485)
with black plastic caps
SD card reader (supports SD, SDHC, SDXC)
Power button
Power LED (blue)
HDD LED (yellow) - Back Panel connectors
HDMI 1.3 connector (supports DVI-D with optional adapter)
DVI-I connector (supports VGA with optional adapter)
2x USB 3.0
2x Gigabit LAN (RJ45)
Microphone input
Audio Line-out (headphone)
DC-input connector for external power adapter
4 pin connector (2.54 mm pitch) for power button, Clear CMOS and 5V DC [4]
Perforation for optional Wireless LAN antennas (2 holes) - Other onboard connectors
Jumper J1: Power on after power fail (hardware solution) [8]
Connector for CMOS battery (with battery)
Fan connector (4 pins) not occupied - Scope of delivery
Two metal feet
VESA mount for 75/100mm standard (two metal brackets)
Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to fix the VESA mount to the external device)
Three screws M3 x 4 mm and a rack (to mount a 2.5" storage into the bay)
Driver DVD (Windows 8 / 7 / XP)
External power adapter with power cord - Environmental Specifications
Operating temperature range: 0~40 °C [5]
Relative humidity, non-condensing: 10~90% - Conformity/Certifications
EMI: FCC, CE, BSMI, C-Tick
Safety: CB, BSMI, ETL, CCC
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
[1] Unified Extensible Firmware Interface (UEFI) - required when booting from hard disks larger than 2.2 TB
[2] Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.
[3] mini-SATA (mSATA)
not to be confused with the "micro SATA" connector, is a newer industry standard which converts the electrical SATA interface (1.5 or 3.0 Gbit/s) to the pysical "Mini PCI Express" mini card form factor.
[4] Four pin header at the back panel
This header allows for connecting an external power button.
It also provides 5V DC voltage for external devices and the Clear CMOS function.
[5] Caution: for high ambient temperature over 35°C we strongly recommend to use SSDs (supporting at least 70°C)
[6] Power on after power fail:
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the DS437 also comes with a hardware-based solution. By removing Jumper J1 (pls. refer quick user guide) the system will start unconditionally once power is supplied.
