• Chassis
  H7-type aluminum chassis, color: black
  Storage bays: 1 x 5.25", 2 x 3.5" (1 external)
  Stealthed drive doors
  Dimensions: 32.6 x 20.8 x 18.9/19.6 cm (LWH) without/with rubber feed
  Volume: 12.8 litres
  Weight: 4.2 kg net / 5.5 kg gross
• Mainboard
  Mainboard FX58 Pro, Shuttle form factor
  Chipset: Intel X58 Express (codenamed Tylersburg) + ICH10R (I/O Controller Hub)
  Solid Capacitors for excellent heat resistance and enhanced 
  system durability, much better than aluminum electrolytic capacitors
• Power supply
  500 Watt mini PSU, AC input voltage: 100~240V
  80PLUS Bronze certified (>82/85/82% energy efficiency at 20/50/100% load)
  Active PFC circuit (Power Factor Correction)
  ATX power connectors: 20 pin + 8 pin (12V)
  Graphics card power connector: 6 pin (75W) and 6+2 pin (150W)
  Other connectors: 3x SATA, 2x Molex, 1x Floppy
• Processor support
  Supports the following Intel® Xeon™ processors with Socket 1366:
  • 1) Intel® Xeon® Processor E5506 (Nahalem-EP)
    2.13 GHz, 4 Cores, 4 Threads, 4M Cache, 45nm, 80W TDP
  • 2) Intel® Xeon® Processor W3565 (Bloomfield)
    3.20/3.46 GHz, 4 Cores, 8 Threads, 8M Cache, 45nm, 130W TDP
• Heatpipe processor cooling
  Shuttle Integrated Cooling Engine (I.C.E.) with efficient heat-pipe technology
• Memory support
  4 x 240 pin slots, supports 3+1 channel configuration (Triple Channel)
  Supports DDR3-1066/1333 SDRAM memory (PC3-8500/10600)
  Supports DDR3-1600 (PC3-12800) in overclocking mode *)
  Max. 4 GB per DIMM,  up to a total size of 16 GB
  Warning: DIMMs with voltage over 1.65V may damage your CPU. 
  Shuttle recommends to install the DIMMs with voltage setting below 1.6V.
• Slots
  2x PCI-Express x16 Version 2.0 expansion slots 
  for x16 graphics cards (full 16 lanes each slot)
  Supports Dual Graphics card by ATI CrossFireX™ or NVIDIA SLI™ Technology. 
  Two graphics cards can be used to enable 4-monitor-operating or ATI CrossFireX™ / NVIDIA SLI™ mode for leading-edge gaming performance.
  Supports two single-slot or one double-width graphics card.
  1x Mini-PCIe x1 slot for an optional WLAN module
• 8-channel audio
  7.1 channel High Definition Audio with Realtek ALC888 codec
  Analog audio: line-out (8-ch), line-in, microphone, Audio AUX-in (onboard)
  Digital audio: optical S/PDIF output
• Dual Gigabit LAN Controller
  2x RJ45 connectors supports Teaming-Mode**)
  Realtek 8111E Ethernet network controller
  IEEE 802.3u 1000Base-T compliant
  Supports 10 / 100 / 1.000 MBit/s operation
  Supports Wake-on-LAN
• Drive connectors
  2x internal Serial-ATA, 6 Gbit/s data transfer rate
  2x internal Serial-ATA, 3 Gbit/s data transfer rate
  2x external Serial-ATA, 3 Gbit/s data transfer rate (1x front, 1x rear)
  Power connector for eSATA hard disks (incl. cable)
  Intel Matrix Storage Technology enabled striping and mirroring
  Supports RAID mode 0 and 1
  Remark: the Raid driver currently supports the 3G ports only.
  Supports AHCI und Native Command Queuing (NCQ)
• Front Panel connectors
  Microphone
  Headphone (Line-out)
  2x USB 3.0
  eSATA / USB 2.0 combo port
  Power button
  Reset button
  Power LED indicator
  HDD LED indicator
• Back Panel connectors
  8x USB 2.0
  2x GigaBit LAN (RJ45)
  1x External Serial ATA Hotplug (eSATA)
  Power connector for eSATA hard disks (incl. cable)
  8-ch Audio line-out (2x front, 2x rear, bass/center, surround/back)
  Audio Line-in
  Digital audio: optical S/PDIF output
  Clear CMOS button
• Onboard connectors
  1x USB 2.0 (1x5 pin header)
  2x fan connectors (4 pins and 3 pins)
  1x Digital Audio S/PDIF output (3 Pins, occupied)
  1x Audio AUX input (analog)
  1x RS-232 COM port (2x5 pin header)
• Accessories
  Driver DVD ROM
  Quick Installation Guide (multi-language)
  2x SATA cables (pre-installed)
  External SATA (eSATA) cable
  One 2x2 pin power cable for eSATA hard disks
  1x Power cord
  Screws
  Heatsink compound
• Conformity
  This device is classed as a technical information
  equipment (ITE) in class B and is intended for use in 
  living room and office. The CE-mark approves the 
  conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices 
  within certain voltage-limits

*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
**) Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.