- Chassis
H7-type aluminum chassis, color: black
Storage bays: 1 x 5.25", 2 x 3.5" (1 external)
Stealthed drive doors
Dimensions: 32.6 x 20.8 x 18.9/19.6 cm (LWH) without/with rubber feed
Volume: 12.8 litres
Weight: 4.2 kg net / 5.5 kg gross - Mainboard
Mainboard FX58 Pro, Shuttle form factor, proprietary design for SX58H7 Pro
Chipset: Intel X58 Express (codenamed Tylersburg) + ICH10R (I/O Controller Hub)
Solid Capacitors for excellent heat resistance and enhanced
system durability, much better than aluminum electrolytic capacitors - Power supply
500 Watt mini PSU, AC input voltage: 100~240V
80PLUS Bronze certified (>82/85/82% energy efficiency at 20/50/100% load)
Active PFC circuit (Power Factor Correction)
ATX power connectors: 20 pin + 8 pin (12V)
Graphics card power connector: 6 pin (75W) and 6+2 pin (150W)
Other connectors: 3x SATA, 2x Molex, 1x Floppy - Processor support
Supports Intel® Core™ i7 processors with Socket 1366
Supports Core-i7-900 series Quad- and Hexa-core processors
Please refer to the support list for detailed processor support information:
http://global.shuttle.com/support_list.jsp
The previous Front Side Bus (FSB) by the new QPI (QuickPath Interconnect)
which features up to 6.4GT/s (3.2GHz) and a maximum transfer rate of 25.6GB/s.
Supports Dynamic Overclock feature (DOC):
Easily overclock function to be enabled through a simple BIOS setting. *) - Heatpipe processor cooling
Shuttle Integrated Cooling Engine (I.C.E.) with efficient heat-pipe technology - Memory support
4 x 240 pin slots, supports 3+1 channel configuration (Triple Channel)
Supports DDR3-1066/1333 SDRAM memory (PC3-8500/10600)
Supports DDR3-1600 (PC3-12800) in overclocking mode *)
Max. 4 GB per DIMM, up to a total size of 16 GB
Warning: DIMMs with voltage over 1.65V may damage your CPU.
Shuttle recommends to install the DIMMs with voltage setting below 1.6V. - Slots
2x PCI-Express x16 Version 2.0 expansion slots
for x16 graphics cards (full 16 lanes each slot)
Supports Dual Graphics card by ATI CrossFireX™ or NVIDIA SLI™ Technology.
Two graphics cards can be used to enable 4-monitor-operating or ATI CrossFireX™ / NVIDIA SLI™ mode for leading-edge gaming performance.
Supports two single-slot or one double-width graphics card.
1x Mini-PCIe x1 slot for an optional WLAN module - 8-channel audio
7.1 channel High Definition Audio with Realtek ALC888 codec
Analog audio: line-out (8-ch), line-in, microphone, Audio AUX-in (onboard)
Digital audio: optical S/PDIF output - Dual Gigabit LAN Controller
2x RJ45 connectors supports Teaming-Mode**)
Realtek 8111E Ethernet network controller
IEEE 802.3u 1000Base-T compliant
Supports 10 / 100 / 1.000 MBit/s operation
Supports Wake-on-LAN - Drive connectors
2x internal Serial-ATA, 6 Gbit/s data transfer rate
2x internal Serial-ATA, 3 Gbit/s data transfer rate
2x external Serial-ATA, 3 Gbit/s data transfer rate (1x front, 1x rear)
Power connector for eSATA hard disks (incl. cable)
Intel Matrix Storage Technology enabled striping and mirroring
Supports RAID mode 0 and 1
Remark: the Raid driver currently supports the 3G ports only.
Supports AHCI und Native Command Queuing (NCQ) - Front Panel connectors
Microphone
Headphone (Line-out)
2x USB 3.0
eSATA / USB 2.0 combo port
Power button
Reset button
Power LED indicator
HDD LED indicator - Back Panel connectors
8x USB 2.0
2x GigaBit LAN (RJ45)
1x External Serial ATA Hotplug (eSATA)
Power connector for eSATA hard disks (incl. cable)
8-ch Audio line-out (2x front, 2x rear, bass/center, surround/back)
Audio Line-in
Digital audio: optical S/PDIF output
Clear CMOS button - Onboard connectors
1x USB 2.0 (1x5 pin header)
2x fan connectors (4 pins and 3 pins)
1x Digital Audio S/PDIF output (3 Pins, occupied)
1x Audio AUX input (analog)
1x RS-232 COM port (2x5 pin header) - Accessories
Driver DVD ROM
Quick Installation Guide (multi-language)
2x SATA cables (pre-installed)
External SATA (eSATA) cable
One 2x2 pin power cable for eSATA hard disks
1x Power cord
Screws
Heatsink compound - Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
**) Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.
