|
Shuttle’s second SFF barebone
The SV25 integrates graphics, sound, network, firewire and USB on the size of a shoebox. This user-friendly case makes extremely good use of the space available with intelligent features like a sliding HDD tray. It has just enough room for everything you could need in a small PC.
|
|
- Chassis
The first XPC chassis type (made of aluminum)
storage bays: 1 x 5.25" (external), 1 x 3.5" ( internal)
dimensions: 27 x 19 x 17 cm (LWH) - Mainboard
Shuttle FV25, Shuttle form factor, proprietary design for SV25
chipset: VIA VT8606T + VIA VT82C686B
Award PnP BIOS, 2MBit flash memory
with hardware monitoring and ACPI power management functions
dimensions: 17.5 x 19 cm - Power supply unit
150 Watt mini PSU (ca. 15.3 x 8.2 x 4.3 cm)
connectors: 20-pin ATX - Processor support
Socket 370 supports the following processors:
Intel FC-PGA/FC-PGA2 Pentium III at 100/133MHz FSB (Tualatin and Coppermine)
Intel FC-PGA/FC-PGA2 Celeron Prozessor at 66/133MHz FSB
and VIA C3 Prozessoren 750MHz and higher
(note: supports Tualatin with 256kB Cache only,
does not support PGA Celeron and VIA Cyrix Samuel I) - Processor cooling system
matching cooling fan in the package - Memory support
2 x 168 pin slots
supports PC100 and PC133 SDRAM memory modules
up to a total size of 1024 MB - Expansion slots
1 x 32 Bit PCI slots rev. 2.2 (incl. PCI riser) - Integrated graphics controller
Built in Savage 4 2D/3D graphics engine
shared Memory max. 32MB
with TV out support PAL and NTSC systems (Crontel 7006) - Audio controller
VIA audio with AC '97 2.1 Codec - LAN controller
Realtek 8100B Fast Ethernet network controller
supports 10 / 100 MBit/s opteration - Firewire controller
IEEE1394 Firewire controller VIA VT6306
with 2 Firewire connectors (backpanel)
supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate - Drive connectors
2 x IDE ATA 100 drives
1 x floppy disk drive - Front-panel I/O
Microphone
Headphone (Line-out)
2x USB 1.1 - Back-panel I/O
VGA monitor connector (S-Video and Composite)
2 x Firewire (6 pin)
PS/2 for mouse and keyboard
LAN (RJ45)
2 x USB 1.1
Line-in
Line-out
Serial port (COM)
Parallel port - Other onboard connectors
1 x CDROM input
2 x fan connectors - Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
|
