• Chassis
  Barebone PC with a black plastic chassis
  Dimensions: 141 x 141 x 29 mm (LWH) = 577 ml
  Weight: 0.36 kg net, 1.26 kg gross
  Hole for Kensington Lock
  Includes vertical stand and 75/100mm VESA mount
• Low Power Consumption
  Power consumption in idle mode: 7 W, full load: 25.5 / 39.6 (without/with graphics)
  (measured with 2x 4 GB DDR3L-1600 SO-DIMM, 64 GB 2.5" SSD, Windows 7 64 bit)
• Operation System
  This barebone system comes without operating system.
  It is compatible with Windows 7 / 8.1 / 10 
  and Linux (e.g. Ubuntu, OpenSUSE, Fedora)
  Supports 32- and 64-bit.
• Processor
  Model: Intel i7-5500U (ULV)
  System-on-a-chip architecture (SoC): no chipset required
  Code name: Broadwell (5th Generation Intel Core)
  Cores / Threads: 2 / 4
  Clock rate: 2.4 GHz, up to 3.0 GHz in Turbo mode
  L1/L2/L3 Cache: 128 kB / 512 kB / 4096 kB
  Memory controller: DDR3L-1600 Dual Channel (1.35V)
  TDP wattage: 15 W maximum
  Manufacturing process: 14 nm
  Maximum Tjunction Temperature: 105°C
  Integrated Intel HD graphics 5500 engine
  Supports 64 Bit, VT-x, VT-d, AVX, AVX2, AES-NI, Enhanced SpeedStep, NX bit, SSE 4.1/4.2
• Integrated Graphics
  Intel HD graphics 5500
  Two digital audio/video ports: Mini-DisplayPort 1.2 [1] and HDMI 1.4a
  Clock rate: 300~950 MHz
  Execution Units (EU): 24
  Supports one Ultra HD / 4K display running at 3840 x 2160 (2160p) resolution
  Max. frame rate with Ultra HD resolution: 60 Hz via DisplayPort, 30 Hz via HDMI
  Supports two independent screens at 2560 x 1600 resolution
  Supports DirectX 11.2, OpenCL 1.3/2.0, OpenGL 4.3
  Supports full AVC/VC1/MPEG2 hardware decoding
  Supports HD video plus multi-channel digital audio via a single cable
  Dynamic, shared memory: up to 1632 MB
• Mainboard / BIOS
  Supports resume after power failure
  Supports Wake on LAN (WOL)
  Supports Power on by RTC Alarm
  Supports booting from USB devices and SD card reader
  AMI BIOS in 8 MByte EEPROM with SPI interface
  Supports hardware monitoring and watch dog function (ITE 8528E)
  Supports Unified Extensible Firmware Interface (UEFI)
• Power Adapter
  External 65 W power adapter (fanless)
  Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
  Output: 19 V DC, max. 3.42 A, max. 65 W
  DC Connector: 5.5/2.5mm (outer/inner diameter)
• Memory support
  2x 204-pin SO-DIMM slot
  Supports DDR3L-1333/1600 (PC3-10600/12800) SDRAM at 1.35V
  Supports Dual Channel mode
  Supports a maximum of 8 GB per DIMM, maximum capacity: 16 GB
  Supports two unbuffered DIMM modules (no ECC)
  Caution: This mainboard does only support 1.35V DDR3L memory modules.
  Note: DDR3L has a lower operation voltage as DDR3
• Slot for M.2 SSD
  M.2 slot: (NGFF) type 2242, key M
  Supports M.2 SSD card, key B+M, dimensions 22 x 42 mm, Serial ATA interface
  Caution: SSDs with PCIe interface (M key only) are not supported
• Audio
  Audio Realtek® ALC 269Q-VC3 High-Definition Audio Codec
  3.5mm / 4-pole combo audio connector for headphones and microphone [2]
  Digital multi-channel audio output: via HDMI and Mini-DisplayPort
• Gigabit LAN
  Intel i218LM PHY connected to the MAC of the processor
  Supports 10 / 100 / 1.000 MBit/s operation (Gigabit)
  Supports WAKE ON LAN (WOL)
  Supports network boot by Preboot eXecution Environment (PXE)
• Wireless Network (WLAN)
  WLAN expansion card (M.2- 2230-AE) with two internal antennas
  Chip: Realtek RTL8821AE
  Supports Wireless LAN IEEE 802.11b/g/n/ac 1T1R, 2,4 GHz or 5 GHz
  Max. speed: 150 Mbps (2.4 GHz) or 433 Mbps (5 GHz)
  Supports Bluetooth 4.0
• 2.5" Drive Bay
  Supports one Serial ATA hard disk
  or one SATA SSD drive in 6.35cm/2.5" format
  Device height: 7 mm (max.)
  Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
  Note: no Serial ATA cable is required
• Card Reader
  Integrated SD card reader
  Supports SD, SDHC and SDXC memory flash cards
  Genesys Logic GL823-OGY08 with USB interface
  Supports booting from SD card
• Front Panel connectors
  2x USB 3.0 (both support 2.0 A charging)
  SD card reader (supports SD, SDHC, SDXC)
  Power button
  Power LED (blue, blinking in suspend mode)
  HDD LED (orange)
• Back Panel connectors
  Mini-DisplayPort 1.2 [1]
  HDMI 1.4a
  2x USB 2.0
  Gigabit LAN (RJ45)
  Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole) [2]
  DC-input connector for external power adapter
• Left Side connectors
  Serial RS232 COM port (D-Sub, 9-pin)
• Supplied Accessories
  Multi-language user guide
  Driver DVD for Windows
  VESA mount set (made of steel, with screws)
  Stand for vertical operation mode
  Bracket for a 2.5" drive with screws
  Power adapter with AC power cord
• Optional Expansion Kits:
  (available from Q1'16 on request)
  1) Graphics: AMD R7 M370 "Litho XT"
  2) I/O box: 1x Gigabit LAN, 2x USB 2.0, 1x 2.5" bay (SATA 6G)
  3) I/O box: 3x RS232 COM port, 1x 2.5" bay (SATA 6G)
• TPM (Optional)
  Only available upon request:
  Trusted Platform Module (TPM) supports TPM 1.2 or 2.0 specifications
• Environmental Spec
  Operating temperature range: 0~50°C [3]
  Relative humidity range: 10~90% (non-condensing)
• Certification and Compliance
  EMI: FCC, CE, BSMI, C-Tick
  Safety: ETL, CB, BSMI
  Other: RoHS, Energy Star, ErP
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
  (1) 2004/108/EC relating to electromagnetic compatibility (EMC),
  (2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
  (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
  (4) 1999/5/EC related to Radio and Telecommunications Terminal Equipment (R&TTE)

[1] Mini-DisplayPort
A monitor with a standard DisplayPort can ideally be connected using an adapter cable that converts Mini-DisplayPort to DisplayPort (e.g. DELOCK 82698).
[2] Audio connector
The 3.5mm audio jack at the back panel of this device supports both a 4-pole connector for headphones and microphone and headphones with only a 3-pole connector. Headsets with separate connectors for headphones and microphone, though, require an appropriate adapter, if also the microphone should be used.
[3] High ambient temperatures
Caution: for high ambient temperature over 40°C we strongly recommend to use SSDs (supporting at least 70°C) and rugged SODIMM memory with wide temperature range (up to 95°C).
[4] Note regarding supported Windows Embedded versions:
Supports Embedded versions based on Windows 7/8:
- Windows 7 Ultimate for Embedded Systems
- Windows 7 Professional for Embedded Systems
- Windows Embedded Standard 7
- Windows Embedded POSReady 7
- Windows Embedded 8.1
- Windows Embedded 8.1 Industry
Do not support Embedded versions based on Windows XP:
- Windows XP Embedded
- Windows XP Professional for Embedded Systems
- Windows Embedded Standard 2009
- Windows Embedded POSReady 2009
- Windows Embedded for Point of Service (WEPOS)