- Chassis
Nettop PC with black chassis made of metal
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35 litres
Weight: 1.3 kg net and 2.1 kg gross
Two holes for Kensington Locks and numerous
threaded holes (M3) at both sides of the chassis - Storage bay
1x 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive
Device height: 9.5 or 12.5 mm (max.) - Operation System
This system comes without operating system.
It is compatible with Windows 8 / 8.1, Windows 7, Linux - Mainboard / Chipset / BIOS
Mainboard: Shuttle FS81 (8 layer design)
Chipset: Intel® H81 Express Chipset
(Intel DH82H81 PCH, code name "Lynx Point")
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI) [2]
Supports power on after power failure [8] - Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, 4.74 A, max. 90 W
DC Connector: 5.5/2.5mm (outer/inner diameter) - Processor support
Socket LGA 1150 (H3) supports the fourth generation of
Intel Core i7 / i5 / i3 / Pentium processors
Maximum supported processor power consumption (TDP) = 65W
Codename "Haswell", 22nm process technology, up to 8 MB of L3 cache
Supports the new generation of "Haswell Refresh" processors
Not compatible with older Socket LGA 1155 processors.
Does not support the unlock-function of Intel K-Series processors.
The Processor integrates PCI-Express, memory controller
and the graphics engine on the same die (depends on processor type)
Please refer to the support list for detailed processor support information. - Processor cooling
Heat pipe processor cooling with two 60 mm fans on the upper side of the chassis - Memory support
2x SO-DIMM slots with 204 pins
Supports DDR3-1333/1600 SDRAM memory (PC3-10600/12800)
The maximum memory clock rate depends on the processor type.
Supports Dual Channel mode
Supports max. 8 GB per DIMM, maximum total size of 16 GB
Supports two unbuffered DIMM modules of 1.5 V - Integrated Graphics
The features of the integrated graphics function
depend on the used processor type. [3]
Supports Dual-Independent-Display at Full HD 1080p resolution
Supports Blu-ray (BD) playback with HDCP
Supports one 4K display running at 3840 x 2160 (2160p/60Hz) high resolution when connected to its DisplayPort video output
HDMI and DisplayPorts supports HD video plus multi-channel digital audio via a single cable
Optional D-Sub/VGA connector [9] - Mini Slots
DS81 features two Mini expansion slots:
1) half size Mini-PCIe, supports PCIe 2.0 e.g. for WLAN cards [5]
2) full size mSATA, supports SATA 6G
e.g. for Mini SATA (mSATA) flash memory cards [6] - Audio
Audio Realtek® ALC 662-VC High-Definition Audio
Two analog audio connectors (3.5mm) at the front panel:
1) 2 channel line out (head phone)
2) microphone input
Digital multi-channel audio output: via HDMI and DisplayPort - Dual Gigabit LAN Controller
Dual Realtek 8111G Ethernet network controller (Gigabit)
Supports 10 / 100 / 1.000 MBit/s operation
With two RJ45 ports (dual network) supports Teaming [4]
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE) - Drive connectors
1x Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
1x Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
With Serial-ATA power connector (onboard)
Supports Unified Extensible Firmware Interface (UEFI) [2] - Card Reader
Integrated card reader
Supports SD, SDHC and SDXC memory flash cards
Supports boot up from SD card - Front Panel connectors
Microphone input
Audio Line-out (headphone)
4x USB 2.0
SD card reader
Power button
Power LED (blue)
HDD LED (yellow) - Back Panel connectors
1x HDMI connector [1]
2x DisplayPort connectors (DP, supports 4k resolution)
Optional 1x D-Sub VGA connector (Accessory PVG01 [9])
2x USB 3.0
2x USB 2.0
2x Gigabit LAN (RJ45)
2x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485)
DC-input connector for external power adapter
Four pin connector (2.54 mm pitch) supports
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
Perforation for optional Wireless LAN antennas (2 holes) - Other onboard connectors
Power on after power fail (hardware solution, Jumper 4) [8]
1x analog VGA graphics output (2x10 pins, 1mm pitch) [9]
1x USB 2.0 (4 Pins)
2x serial interface (COM) occupied for back panel connectors
Fan connector (4 pins) occupied by the cooling system
LPC interface (2x10 pins)
Audio connectors (7x2 pins)
Speaker connector (2 pins)
Power connector for SATA drives (4 pins) - Scope of delivery
Multi-language user guide
VESA mount for 75/100mm standard (two metal brackets)
Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to fix the VESA mount to the external device)
Four screws M3 x 4 mm (to mount a 2.5" storage into the bay)
Driver DVD (Windows 7/8 32/64 bit)
1x SATA cable
External power adapter with power cord
Heatsink compound - Optional Accessies:
(1) WLN-S: Wireless LAN kit consisting of a Mini-PCIe card,
two antennas and appropriate antenna cables.
(2) PVG01: optional D-Sub VGA video output [9] - Environmental Specifications
Operating temperature range: 0~50 °C [7]
Relative humidity, non-condensing: 10~90% - Conformity/Certifications
EMI: FCC, CE, BSMI, C-Tick
Safety: CB, BSMI, ETL
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
[1] HDMI supports DVI-D with optional adapter
[2] Unified Extensible Firmware Interface (UEFI) - required when booting from hard disks larger than 2.2 TB under Windows 64 bit operating systems such as Windows 7, Windows Vista SP1 and Windows Server 2008/2003 SP1.
[3] Integrated video outputs (HDMI and DisplayPorts)
Not all LGA1150 Intel processors may support integrated graphics. Please check the specification of the used processor. If you want to use the video outputs, then please make sure, that the used processor provides integrated graphics.
[4] Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.
[5] Optional Wireless LAN module: this Slim PC supports an optional WLAN module, which consists of a half-size Mini-PCIe card with IEEE 802.11n functionality and an external antenna with appropriate antenna cable. Shuttle offers a suitable accessory kit "WLN-S" with two antennas.
[6] mini-SATA (mSATA)
not to be confused with the "micro SATA" connector, is a newer industry standard which converts the electrical SATA interface (1.5 or 3.0 Gbit/s) to the pysical "Mini PCI Express" mini card form factor.
[7] Caution: for high ambient temperature over 40°C we strongly recommend to use SSDs (supporting at least 70°C) and rugged SODIMM memory with wide temperature range (up to 95°C).
[8] Power on after power fail:
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the DS81 also comes with a hardware-based solution. By removing Jumper 4 (on the mainboard beside the hard disk LED) the system will start unconditionally once power is supplied.
[9] Optional D-Sub/VGA connector
The mainboard features one analog graphics port. This 15-pin D-Sub VGA connector can be lead to the outside of the backpanel by using an optional adapter PVG01. However doing so means one serial port (COM) less can be used at the backpanel.