• Fanless and silent
    Passive heatpipe cooling, absolutely no fan noise
    Perfect for noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • 24/7 nonstop operation
    This device is approved for 24/7 permanent operation.
    - Free circulation of air amongst the PC must be guaranteed.
    - Ventilation holes must be kept clear.
    - If a hard disk or SSD is installed, this must also be approved
    for permanentoperation by its manufacturer.
  • IP54 protectioned
    The front panel is dust-protected and protected from
    splashing of water according to protection class IP54.
  • Chassis
    Colour: black or white
    Dimensions: 393.6 x 272.5 x 39.8 mm (W x H x D)
    100 mm VESA mountable
    Hole for Kensington lock
    Weight: 3.25 kg net, 4.5 kg gross
  • Operating system
    This system comes without operating system.
    It is compatible with:
    - Windows ( 64-bit)
    - Linux (64-bit)
  • Touchscreen
    Touchscreen function supports fingertip input
    Capacitive Touch Panel with 10-point multi-touch
    Supports input with gloves (PVC, cotton, cotton/linen)
    Stylus pen not supported
  • 39.6 cm display (15.6")
    39.6 cm / 15.6" LC display, IPS technology
    Ratio: 16:9 wide-screen panel
    Native resolution: 1920 x 1080 = 2 Megapixel (Full HD / 1080p)
    Brightness: 250 cd/sqm
  • Processor
    Model: Intel Core i3-8145U (ULV)
    System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset required
    FCBGA1528 package - directly soldered onto the mainboard
    Code name: Whiskey Lake U (8th Generation Intel Core)
    Cores / Threads: 2 / 4
    Clock rate: 2.1 GHz, Turbo clock rate: 3.9 GHz
    L3 Smart Cache: 4 MB
    TDP wattage: 15 W maximum
    Manufacturing process: 3rd-generation enhanced 14nm++
    Maximum Tjunction Temperature: 100 C
    Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
  • Integrated Graphics
    Intel HD Graphics 620
    GPU clock frequency: 300~1000 MHz
    Execution Units (EUs): 24
    Supports DirectX 12
    Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
    Supports Quick Sync Video and Clear Video HD technology
  • Up to three displays simultaneously
    Two video ports support two additional independent screens:
    1) HDMI 1.4b supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
    2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
    Multi-Monitoring modes as follow:
    Clone mode: All displays show the same content at 1920 x 1080.
    Extended mode: All displays show different content.
  • BIOS
    AMI BIOS in 8 MByte EEPROM with SPI interface
    Supports Power-on-after-power-fail / always on
    Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
    Supports hardware monitoring and Watchdog function
    Supports Firmware TPM v2.0 function
  • Memory
    2x SO-DIMM slot with 260 pins
    Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
    Also compatible with DDR4-2666 memory modules
    Supports Dual Channel mode
    Supports a maximum of 32 GB per DIMM, maximum capacity: 64 GB
    Supports two unbuffered DIMM modules (no ECC or registered)
  • 2.5" Hard disk drive / SSD
    Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
    The SATA 3.0 interface supports up to 600 MB/s of data transfer speed (6 Gbit/s)
    Supports one drive with up to 9.5 mm in height
    SATA cable pre-installed
  • M.2-2280 Slot
    The M.2 2280 BM slot provides the following interfaces:
    - PCI-Express Gen. 3.0 X4 with up to 32 Gbps of data transfer speed
    - SATA v3.0 (max. 6 Gbps)
    It supports M.2 cards with a width of 22 mm
    and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
    Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe-SSDs (with M key)
  • Card Reader
    Integrated card reader supports SD, SDHC and SDXC memory flash cards
  • Webcam
    Integrated Full-HD 2.0 Megapixel (1920 x 1080) camera
  • Microphone and speakers
    Front panel with integrated Electret Condenser Microphone and
    2x 2 W speakers
  • Integrated Audio
    Realtek ALC269 Audio Codec
    Two analog audio connectors (3.5 mm) on the bottom side:
    1) Line-out (head-phones)
    2) Microphone input
    Digital Audio is supported via HDMI.
  • Wired Network
    Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports WAKE ON LAN (WOL) from S3, S4 modes
    Supports network boot by Preboot eXecution Environment (PXE)
  • Wireless Network (WLAN & BT)
    Model: AzureWave AW-CB209NF
    Chipset: Realtek RTL8821CE
    M.2-2230 (NGFF) expansion card
    Connected with two internal antennas (via IPEX4)
    Supports WiFi IEEE 802.11b/g/n/ac in the 2.4/5 GHz band, 1T1R
    Max. 72.2 / 150 Mbps using 20 / 40 MHz bandwidth in n-mode
    Max. 433.3 Mbps using 80 MHz bandwidth in ac-mode
    Supports Bluetooth 4.2 in the 2.4 GHz band (BT 4.0 under Linux)
  • Front LEDs
    Power LED (blue)
    Hard disk LED (orange)
    Battery LED (red)
  • Connectors left side
    Power button
    2x USB 3.1 Gen. 1 (= USB 3.0, max. 5 Gb/s)
    SD card reader
    Hole with power button
  • Connectors bottom side
    HDMI 1.4b (supports digital video and digital audio)
    VGA connector (D-Sub 15 pol., analog video)
    2x USB 3.1 Gen. 1 (= USB 3.0, max. 5 Gb/s)
    2x USB 2.0
    2x COM/serial (D-Sub)
    Gigabit Network (LAN, RJ45)
    Audio Line-out / headphones (3.5 mm jack)
    Microphone input (3.5 mm jack)
    DC input for external power adapter (5.5 / 2.5 mm)
    2x Perforation for optional WLAN/LTE antennas (diameter: 7 mm)
  • Connectors onboard
    Internal USB 2.0 type A connector for a USB stick
    Serial ATA (6 Gbps) data/power combo connector
    3x USB 2.0 header (all occupied)
    Microphone connector (2-pin, occupied)
    Speakers connector (4-pin, occupied)
    eDP connector (Embedded DisplayPort) - occupied by the display
    LPC connector (occupied)
    I2C connector for optional NFC accessory
    CMOS battery connector (2-pin occupied)
    System battery connector (14-pin, battery is optional)
  • Opening holes for optional antennas
    The chassis features two perforated 7 mm holes
    for optional antennas mounted with an (RP-)SMA connector
    for wireless network such as WLAN or WWAN (e.g. LTE)
  • Power adapter
    External 65 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
    Output: 19 V DC, max. 3.42 A, max. 65 W
  • DC Input connector
    DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
    The DC-input of the computer supports an external
    power source with either 12V 5 % or 19V 5%.
  • Included Accessories
    Quick Guide
    Driver DVD
    2x bracket to install a 2.5" drive
    External Power Adapter (65W / 19V)
    Power cord
  • Optional Accessories
    1) COM port adapter PCP21 or 2x PCP11 provides two more serial COM ports on the right side
    2) WLAN with two external Antennas WLN-M: supports IEEE 802.11ac and BT 4.0
    To use this accessory, the existing WLAN module must be removed.
    3) NFC module (on request only)
  • Environmental criteria
    Operating temperature: 0~40 C
    Humidity: 10~90 %
  • Certification and Compliance
    Safety: CB, ETL
    Other compliances: RoHS, ErP Lot3, Energy Star
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EU relating to ecodesign requirements for energy-related products (ErP),
    (4) 2014/53/EU related to Radio and Telecommunications Terminal Equipment (RED)
2020 Shuttle Europe | Legal notice | Contact | Terms and Conditions | Privacy Policy | Sitemap