• Fanless and silent
    Passive cooling, no fan noise at all
    Perfect to be used in noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • Low power consumption
    Power consumption: ca. 16W (idle mode) and ca. 25W (full load)
  • Chassis
    Dimensions without Stand: 22 cx 16 x 3.6 cm (DxHxW) = 1.15 litres
    Weight: 1.6 kg net, 2.3 kg gross
    Hole for the Kensington Lock at the back panel
    Optional accessory: 75mm and 100mm VESA mounting kit (PV03)
  • Operation System
    This system comes without operating system.
    It is compatible with Windows 7 (32 bit)
  • Processor
    Intel Dual Core Atom processor D2700 (Codename: Cedarview)
    Intel Hyper-Threading technology: 2-threads per core
    32 nm manufacturing process, Micro-FCBGA11 package
    Intel 64 architecture, Core clock: 2.13 GHz
    L2 Cache: 1024kB , TDP: max. 10W
    Supports SSE2, SSE3, SSSE3, Execute Disable Bit
    Integrated North Bridge with controller for memory and graphics
  • Passive cooling without fan
    Passive, completely fanless cooling through convective heat transfer
    Warning: Please make sure the system is always placed 
    upright using either its stand or the optional VESA mount. 
    Ventilation holes must not be blocked to ensure sufficient cooling.
  • Chipset
    Intel® NM10 Express Chipset (south bridge)
    Platform Controller Hub (PCH)
    Code name: Tiger Point
  • BIOS
    AMI BIOS in a 8Mbit Flash ROM supports PnP, ACPI 2.0
    Supports external USB flash memory card boot up
    Supports Power fail resume / AC power on state / always on / always off
    Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states
    Supports Unified Extensible Firmware Interface (UEFI)
  • Memory
    2x SO-DIMM slots with 204 pins
    Supports two modules DDR3-1066 (PC3-8500)
    DDR3-1333 is supported at DDR3-1066 clock rate
    Supported maximum capacity: 4 GB
  • Hard disk drive/SSD
    Supports one Serial ATA hard disk (max. 5400 rpm)
    or one SATA SSD drive in 6.35cm/2.5" format
    The SATA 2.0 interface supports up to 300MB/s data transfer speed
    Supports a drive with 9.5mm height (12.5mm is not supported)
    Supports Unified Extensible Firmware Interface (UEFI)
  • Integrated Graphics
    The Graphics Processing Unit (GPU) is integrated into the processor
    Intel GMA 3650, Graphics Base Frequency: 640 MHz
    Supports DirectX 9
    Maximum shared memory: 8MB pre-allocated
    plus 384MB Video Memory Technology (DVMT)
    Three  video outputs: HDMI v1.3, DVI-D and D-Sub (VGA)
    Two outputs can be used at the same time.
    Supports dual display in clone or extended mode.
    HDMI and DVI support the Intel HDCP function
    (High bandwidth Digital Content Protection)
    HDMI/DVI display resolution up to 1920x1200.
  • Integrated Audio
    IDT92HD81 Audio Codec with Azalia support
    Two analog audio connectors (3.5mm): 
    1) Line out (head phone)
    2) microphone input
  • Card Reader
    Integrated card reader supports SD, SDHC and SDXC memory flash cards
  • Wired Network
    RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.
    Network controller JMC 251
    Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states
  • Wireless Network (WLAN)
    Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream
    Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i
    Half size Mini-PCIe-Card
  • Connectors
    HDMI v1.3 digital video and audio output
    DVI-D digital video output
    D-Sub/VGA analog video (15 pin)
    5x USB 2.0 (1x front, 4x rear)
    Gigabit network (LAN, RJ45)
    Audio Line-out (head phone)
    Microphone input
    2x RS232 Serial Ports at the front panel
    DC input for the external power adapter
  • Internal USB port
    The front USB connector can be converted to an internal port.
    This can e.g. be used for an internal USB memory stick
    as a cost-saving alternative to a hard disk as storage for the operation system.
  • LEDs and Buttons
    Power button
    Power LED (white)
    Hard disk LED (blue)
  • Power supply
    External 40W AC/DC power adapter (fanless), 19V / 2.1A
    AC Input: 100~240V AC, 50~60Hz
    Automatic voltage adjust
    Dimensions: 89.5 x 37 x 26.5 mm (LWH)
    DC Connector: 5.5/2.5mm (outer/inner diameter)
  • 24/7 nonstop operation
    This device is approved for 24/7 permanent operation.
    Requirements:
    - Free circulation of air amongst the PC must be guaranteed.
    - Ventilation holes must be clear.
    - If a hard disk is installed, this must also be approved for permanent 
    operation by its manufacturer (max. one hard disk)
  • Environmental Spec
    Operating temperature range: 0~35°C
    Relative humidity range: 10~90% (non-condensing)
  • Certification and Compliance
    EMI: CE, FCC, BSMI, C-Tick, CCC
    Safety: CB, BSMI, ETL
    Other compliances: RoHS, Eup Lot6
    This device is classed as a technical information
    equipment (ITE) in class B and is intended for use in 
    living room and office. The CE-mark approves the 
    conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices 
    within certain voltage-limits
© 2020 Shuttle Europe | Informazione legale | Contatto | CGC | Informativa privacy | Sitemap