- Special Pro Features
Fingerprint recognition technology **)
Speed-Link - easily connect 2 PCs via USB and share data - Chassis
P2-type aluminum chassis, color: black
storage bays: 1 x 5.25", 3 x 3.5" (2 internal)
stealthed drive doors
dimensions: 32.5 x 22 x 21 cm (LWH)
weight: 4.2 kg net / 6.0 kg gross - Mainboard
Shuttle FX38, Shuttle form factor, proprietary design for XPC SX38P2 Pro
Chipset: Intel X38 Express (MCH) + ICH9R (I/O Conroller Hub)
Solid Capacitors for excellent heat resistance for enhanced system durability
Color slots/connectors design (Power switch, USB, PCIe, DDR2)
Dimensions: 20.5 x 28 cm - Power supply
450 Watt ATX mini PSU, AC input voltage: 100~240V
80 PLUS® certified (80% or greater energy-efficient)
Dimensions: 85(W) x 83(H) x150(D) mm
Connectors: 20-pin ATX, 4-pin ATX12V
Active PFC circuit (Power Factor Correction) - Processor support
Socket 775 supports Single, Dual and Quad Core processors from Intel
with Core technology and 800, 1066 or 1333MHz front side bus:
Supports Core 2 Quad/Extreme/Duo, Pentium Dual-Core, Pentium D/4
Supports Core 2 multi-core processors in 45nm technology, too
Intel Celeron and Processors with 533MHz FSB are not supported.
Please refer the support list for detailed processor support information. - Overclocking*)
CPU frequency, CPU voltage, RAM frequency, RAM voltage
Dynamic Overclock feature:
Easily overclock from 3/5/7/10% through the BIOS. - Processor cooling
New Shuttle I.C.E. heat-pipe module (Integrated Cooling Engine)
SilentX Cooling and Noise Reduction Technology
advanced Heatpipe technology, linear fan control.
3 independent cooling areas.
OASIS Cooling Technology: additional fanless heat-pipe design
covering the MOSFET modules (VRM), north- and southbridge - Memory support
4 x 240 pin slots, supports Dual Channel
supports DDR2-667/800 SDRAM memory
(DDR2-1066 in overclocking mode*)
max. 2 GB per DIMM, up to a total size of 8 GB - PCI-Express-Slots
2x PCI-Express x16 Version 2.0 expansion slots
for x16 graphics cards (full 16 lanes each slot)
Supports Dual Graphics card by ATI CrossFire™ Technology.
Two graphics cards can be used to enable 4-monitor-operating or ATI CrossFire™ mode for leading-edge gaming performance.
Supports two single-slot or one double-width graphics card.
1x Mini-PCIe x1 slot at the bottom of the chassis
supports Intel Turbo Memory (codename: Robson) - 8-channel audio with DD/DTS
7.1 channel High Definition Audio, Realtek ALC888DD codec
Supports Dolby® Digital Live! and DTS™ Connect (Digital Theater Systems)
analog: line-out (8-ch), line-in, microphone, CD-in, AUX
digital: optical and coaxial S/PDIF-out - LAN Controller
Marvell 88E8056 Ethernet network controller
With PCI Express interface
IEEE 802.3u 1000Base-T compliant
Supports 10 / 100 / 1.000 MBit/s opteration
Supports Wake-on-LAN - Firewire Controller
IEEE1394 Firewire controller TI TSB43AB22A
Complies with 1394 OHCI specification revision 1.0
2 Firewire connectors (front and rear)
Supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate - Drive connectors
Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
4x internal (SATA) plus 2x external (eSATA)
Intel Matrix Storage Technology enabled striping and mirroring
Supports RAID 0, 1, 5, 10 and JBOD on just two or three hard disk drives
Supports Native Command Queuing (NCQ)
1x IDE ATA 100 drives (JMicron JMB368 Controller)
1x floppy disk drive - Front Panel connectors
Microphone
Headphone (Line-out)
2x USB 2.0
Firewire (Mini 4 pin connector)
Speed-Link button
Fingerprint recognition
Power button
Reset button
Power indicator (blue LED)
HDD indicator (orange LED) - Back Panel connectors
6x USB 2.0
Firewire (6 pin)
GigaBit LAN (RJ45)
2x External Serial ATA Hotplug (eSATA)
8-ch Audio line-out (2x rear/front, bass/center, surround/back)
Digital Audio S/PDIF output: optical and coaxial
Audio Line-in
Audio Microphone input
Clear CMOS button
Perforation for optional Wireless LAN Antenna - Other connectors
4x USB 2.0 (two sets with 2x5 pins)
4x fan connectors (3x 4 pins, 1x 3 pins)
Headers for PS/2 mouse and PS/2 keyboard - Accessories
Multi-language XPC Installation Guide
Driver DVD with software (Norton Internet Security 2007, Adobe Reader)
Data cables: 1x floppy, 1x PATA, 3x SATA (PATA/2xSATA preinstalled)
1 set to 2 set 6-pin VGA power cable
2x Cross Fire bridges
1 set 4 pin to SATA power cable
Power Cord
Screws, Heatsink Compound - Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
**) Fingerprint software: internet access required for activating procedure
