- Chassis
H7-type aluminum chassis, color: black
storage bays: 1 x 5.25", 2 x 3.5" (1 internal)
stealthed drive doors
Dimensions: 32.5 x 20.8 x 18.9 cm (LWH), 12.8 litres
Weight: 3.6 kg net / 5.0 kg gross - Mainboard
Shuttle FP45, Shuttle form factor, proprietary design for XPC SP45H7
Chipset: Intel P45 Express (MCH) + ICH10 (I/O Conroller Hub)
Solid Capacitors for excellent heat resistance for enhanced system durability - Power supply
300 Watt mini PSU, AC input voltage: 100~240V
80 PLUS® certified (80% or greater energy-efficient)
Active PFC circuit (Power Factor Correction)
Dimension: 190 x 82 x 43 mm (LWH) - Processor support
Socket 775 supports Intel processors with Core Technology
Supports 1600, 1333, 1066 or 800MHz front side bus (not 533MHz)
Supports Intel Core 2 Quad, Core 2 Duo, Pentium Dual-Core,
Celeron Dual-Core, Celeron 4xx
Supports 65nm and 45nm processors
Please refer the support list for detailed processor support information.
Mainboard BIOS supports Dynamic Overclock *) **)
Supports Dynamic Energy Saving (D.E.S.) Technology ***) - Processor cooling
Shuttle I.C.E. (Integrated Cooling Engine)
advanced I.C.E. Heatpipe technology, linear controlled 92mm fan
SilentX cooling and noise reduction technology with Active Airflow - Memory support
4 x 240 pin slots, supports Dual Channel
supports DDR2-667/800 SDRAM memory
max. 4 GB per DIMM, up to a total size of 16 GB - Slots
1x PCI-Express v2.0 slot
Supports Dual-slot (double-width) graphics cards
1x PCI 32 bit slot - 8-channel audio
7.1 channel High Definition Audio with Realtek ALC888 codec
analog: line-out (8-ch), line-in, microphone, CD-in, AUX
digital: optical S/PDIF-out - LAN Controller
Marvell 88E8056 Ethernet network controller
With PCI Express interface
IEEE 802.3u 1000Base-T compliant
Supports 10 / 100 / 1.000 MBit/s operation
Supports Wake-on-LAN - Firewire Controller
IEEE1394 Firewire controller TI TSB43AB22A
Complies with 1394 OHCI specification revision 1.0
1x 6pin Firewire connector at the backpanel
Supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate - Drive connectors
Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
3x internal (SATA) plus 3x external (eSATA)
1x IDE ATA 100 drives
1x floppy disk drive - Front Panel connectors
Microphone
Headphone (Line-out)
2x USB 2.0
External Serial ATA Hotplug (eSATA)
Power button
Reset button
Power indicator (blue LED)
HDD indicator (orange LED) - Back Panel connectors
4x USB 2.0
Firewire (6 pin)
GigaBit LAN (RJ45)
2x External Serial ATA Hotplug (eSATA)
8-ch Audio line-out (2x rear/front, bass/center, surround/back)
Audio Line-in
Digital Audio: optical S/PDIF output
Clear CMOS button - Optional Back Panel connectors
Wireless LAN Antenna (Perforation for PN20)
PS/2 Mouse & Keyboard (Perforation for PS10)
Parallel port (Perforation for PC8) - Other connectors
6x USB 2.0 (three sets with 2x5 pins)
2x fan connectors (4 pins and 3 pins)
Headers for PS/2 mouse and PS/2 keyboard - Accessories
Multilanguage XPC Installation Guide(En, De, Fr, Es, TC, Jp)
XPC 32/64bit Driver CDROM for Windows XP/Vista
Data cables: 1x floppy, 1x PATA, 2x SATA (PATA/SATA preinstalled)
Power Cord
Screws, Heatsink Compound - Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
**) Dynamic Overclocking Technology (D.O.C.)
This is the overclocking function in the BIOS Setup, which is designed to detect the load balance of CPU while running programs, and to adjust the best CPU frequency automatically. When the mainboard detects CPU is running programs, it will speed up CPU automatically to make the program run smoothly and faster. When the CPU is temporarily suspending or staying in the low load balance, it will restore the default settings instead.
***) Dynamic Energy Saving (D.E.S.)
The Dynamic Energy Saving (D.E.S.) technology helps to improve power efficiency significantly and reduces heat inside the case. A special chip monitors the CPU load by the CPU's Power State Indicator (PSI) signal and switches on/off 3 out of 4 of the MOS power phases depending on stress and load of the system. This hardware-based technology helps to eliminate wasted energy. Lower power consumption also means less noise from cooling systems as a consequence.
