SilentX 300W Power Supply Unit, designed for XPC

The PC50 provides the additional power needed to satisfy the demands of high power graphics cards and large capacity storage devices. It is the optimal solution for power users wanting to upgrade without compromising the stability, low-noise, and portability of the XPC.

  • Input
    Input Voltage: 90~264V AC
    Input Current: 7A / 3.5A (100/240V AC)
    Frequency: 63Hz / 47 Hz
    Efficiency: > 70% at full load
    Active PFC (Power Factor Correction)
  • Output
    Total combined output (3.3V / 5V / 12V): 300W
    Total combined output (3.3V / 5V): 110W
    Max. Current: 3.3V: 14.5A / 5V: 19A / 12V: 8A and 13.5A / -12V: 0.3A
    Hold up time: >16ms (full load, 115V AC)
    Rise time: <20ms (full load, nominal line)
    Short circuit protection (SCP): latch off
    other protection: OVP,OTP,OPP,UVP,OCP
    Power good signal: TTL compatible
    +5V Standby at 2.0A
    +3.3V Remote sensing
  • Environmental
    Operating Temperature: 10~50°C
    Storage Temperature: -40~70°C
    MTBF: >100.000 hours (75% load, 25°C)
    Noise: <30dB
  • Saftey/EMI
    Saftey: CUL, TÜV, CB, CCC
    EMI: FCC class B, CE, BSMI, CCC
    Energy Star compliant
  • Connectors
    Mainboard ATX 4 pin (12V) + 20 pin
    1x FDD, 2x S-ATA, 3x Molex
    Cable length designed for the XPC
  • Other
    Dimension: 190 x 82 x 43 mm (l x w x h)
    Smart Fan Temp-Speed control
  • XPC compatibility
    Compatible with XPC chassis G, G2, G5, G6 and the XPC model ST61G4, 
    but it is NOT compatible with SD11G5, SS58G2, SK83G, SN85G4, SN95G5 and ST20G5.
© 2020 Shuttle Europe | Infos légales | Contact | CGV | Protection des données | Plan du site