- Fanless and silent
 Passive cooling, no fan noise at all
 Perfect to be used in noise-sensitive environments
 Fanless, dust-free and thus virtually maintenance-free
- Low power consumption
 Power consumption: ca. 20.5W (idle mode) and ca. 29W (full load)
- Chassis
 Dimensions without Stand: 25.2 x 16.2 x 3.85 cm (DxHxW) = 1,57 liter
 Weight: 2.1 kg net, 2.8 kg gross
 Hole for the Kensington Lock at the back panel
 Optional accessory: 75mm and 100mm VESA mounting kit (PV01)
- Operation System
 This system comes without operating system.
 It is compatible with Windows 7 und Windows XP
- Processor
 Intel Dual Core Atom processor D525 (Codename: Pineview-D)
 45nm manufacturing process, FCBGA559
 Intel Hyper-Threading technology: 2-threads per core
 Intel 64 architecture, Core clock: 1.8 GHz
 L2 Cache: 1024kB , TDP: max. 13W
 Integrated North Bridge with controller for memory and graphics
- Cooling
 Passive, completely fanless cooling
- Chipset
 Intel® NM10 Express Chipset
 Platform Controller Hub (PCH)
 Code name: Tiger Point
- BIOS
 AMI BIOS in a 2Mbit Flash ROM supports PnP, ACPI 3.0
 Supports external USB flash memory card boot up
 Supports the Power-on-after-power-failure feature
 Supports Preboot eXecution Environment (PXE) to boot via network
- Memory
 Supports one module DDR3-667/800 (PC3-5300/6400), max. 4GB
 SO-DIMM slot with 204 pins
 Memory modules that are designed for higher frequencies can also be used.
 The installed modules then run at an actual frequency of 800 MHz.
- Optical drive (optional)
 Support an optical DVD or Blu-ray slim-line drive
 Serial ATA interface, 12.7mm height, Slimline SATA connector
- Hard disk drive/SSD
 Supports one Serial ATA hard disk
 or one SATA SSD drive in 6.35cm/2.5" format, max. 5400 rpm
 The SATA 2.0 interface supports up to 300MB/s data transfer speed
 Supports a drive with 9.5mm height (12.5mm is not supported)
- Discrete ATI Graphics
 Graphics processor: ATI Mobility Radeon HD5430
 80 Stream Processing Units, 512MB DDR3 VRAM
 Supports Shader Model 5.0, DirectX 11
 Supports H.264, VC-1, MPEG-2 and Adobe Flash
 Power consumption TDP = 7W
 Two video outputs:
 - Digital HDMI v1.3 output (DVI via adapter), max. 1920 x 1200
 - Analog D-Sub VGA output, max. 2048 x 1536
 - Supports Extended Desktop Mode and Clone Mode
 Supports full HD decode (1080i/p)
 Supports Blu-ray play back in combination with an optional slim-line
 Blu-ray drive and appropriate software
 Integrated HD audio controller for 7.1 Surround Sound via HDMI.
 Supports AC-3, AAC, Dolby TrueHD and DTS Master Audio formats.
- Integrated Audio
 IDT92HD81 Audio Codec with Azalia support
 Two analog audio connectors (3.5mm):
 1) Line out (head phone)
 2) microphone input
 Digital Audio via HDMI port
- Card Reader
 Integrated card reader supports SD, SDHC and SDXC memory flash cards
- Wired Network
 RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.
 Supports Deep Sleep Mode (DSM)
- Wireless Network (WLAN)
 Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream
 Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i
 Single-chipset: Realtek RTL8188CE
 Half size Mini-PCIe-Card
- Connectors
 HDMI v1.3 supports Digital Video and Digital Audio
 VGA Analog Video (D-Sub 15 pol., analog)
 5x USB 2.0 (1x front, 4x rear)
 Gigabit network (LAN, RJ45)
 Audio Line-out (head phone)
 Microphone input
 DC input for power adapter
- LEDs and Buttons
 Power button
 Power LED (white)
 Hard disk LED (blue)
- Power supply
 External 40W AC/DC power adapter (fanless), 19V / 2.1A
 AC Input: 100~240V AC, 50~60Hz
 Automatic voltage adjust
 Dimensions: 89.5 x 37 x 26.5 mm (LWH)
 DC Connector: 5.5/2.5mm (outer/inner diameter)
- Certification and Compliance
 EMI: CE, FCC, BSMI, C-Tick
 Safety: CB, BSMI, ETL
 Other compliances: RoHS, Eup Lot6
- Environmental Spec
 Operating temperature range: 0~35°C
 Relative humidity, non-condensing: 10~90%
- Conformity
 This device is classed as a technical information
 equipment (ITE) in class B and is intended for use in
 living room and office. The CE-mark approves the
 conformity by the EU-guidelines:
 - EMV-guideline 89/336/EWG electromagnetic tolerance
 - LVD-guideline 73/23/EWG use of electric devices
 within certain voltage-limits

 
	
		
		
			
	
		










