- Chassis
Slim X-type chassis, colour: black
Dimensions: 250 x 200 x 78.5 mm (LWH)
Weight: 1.9 kg net, 3.0 kg gross
Open front - no concealed front panel connectors
Hole for Kensington Lock at the back panel - Operation Position
(1) horizontal on its feed
(2) vertical with the optional stand (Accessory PS01)
(3) vertical with the supplied VESA mount bracket - Operation System
This system comes without operating system.
It is compatible with Windows 10 / 8.1 / 7 and Linux (64-bit).
Important note: Windows 7 and 8.1 is only supported in combination with the 6th generation Intel Core processors "Skylake". - Mainboard, Chipset and BIOS
Mainboard FH110G, form factor 17 x 19 cm
Chipset: Intel® H110 Chipset
(Intel® GL82H110 PCH, Codename "Sunrise Point")
AMI BIOS in 8 MB EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power-on-after-power-fail [1] - Power Adapter
External 180 W power adapter (fanless)
Input: 100~240 V AC, 50~60 Hz, max. 2.5 A
Output: 19.5 V DC, max. 9.23 A, max. 180 W output wattage
AC Connector with protective-earth contacts, cable length: 1.7 m
DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
Dimensions: ca. 167 x 82 x 25.5 mm = 350 ml - Processor Support
Socket LGA 1151 (H4) supports
Intel Core i7 / i5 / i3, Pentium and Celeron processors
- 6th generation, code name "Skylake" (6000 series)
- 7th generation, code name "Kaby Lake" (7000 series)
Maximum supported processor power consumption (TDP) = 65 W
14 nm process technology, up to 8 MB of L3 cache
Not compatible with Intel Xeon E3 V5 processors for socket LGA 1151 and processors with the older Socket LGA 1150.
Does not support the unlock function of Intel K-Series processors.
Please refer to the support list for detailed processor support information at global.shuttle.com. - Processor Heatpipe Cooling
Processor cooling with heatpipe technology and two fans (60 mm) - Memory support
2x 260-pin SO-DIMM slot
Supports DDR4-2133/2400 (PC4-17000/19200) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 16 GB per DIMM,
Maximum total capacity: 32 GB
Supports two unbuffered DIMM modules (no ECC or registered) - PCIe Expansion Slot
1x PCI-Express X16 v3.0 slot with installed 90° Riser Card
The used expansion card must meet the following conditions:
- Maximum dimensions: 208.5 mm x 120 mm x 30 mm (Single Slot)
- Maximum power consumption: 75 W - Integrated Graphics
The features of the integrated Intel HD graphics function
depend on the processor type used.
Supports DirectX 12, OGL 5.x, OCL 2.x
The PC features the following video outputs:
(1) HDMI 1.4 (supports 1080p/60 and 2160p/30)
(2) VGA / 15-pin D-Sub (supports analog video)
Supports two independent displays simultaneously
HDMI supports 7.1 multi-channel digital audio over the same cable
Maximum shared memory of 1760 MB - Audio Function
Audio Realtek® ALC 662 High-Definition Audio
Two analog audio connectors (3.5 mm) at the front panel:
(1) Microphone input
(2) Headphones output (Line out)
Digital 7.1 audio output: is possible via the HDMI port - Gigabit LAN Controller
Intel i211 network controller
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE) - 2.5" Storage Bay
This system features one 2.5" drive bay which is accessible
from the bottom of the housing.
It supports one 2.5" / 6.35 cm hard disk or SSD with max. 9.5 mm height.
The system includes a pre-installed data/power cable [3].
The connector supports SATA III with max. 6 Gbps. - M.2-2280 M Slot
The M.2 2280 M slot provides the following interfaces:
- PCI-Express v2.0 X4
- SATA v3.0 (6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280) and
M.2 SSDs with SATA or PCIe interface. - M.2-2230 AE Slot
The M.2 2230 AE slot has the following interfaces:
- PCI-Express v2.0 X1
- USB 2.0
It supports M.2 cards with a width of 22 mm and a length of 30 mm. This slot is intended for Wireless LAN (Wifi), Bluetooth, GSM/UMTS cards and other. A SATA interface for SSD cards is not available here. - Internal USB Port
This system features one internal USB port
which is located behind the bottom cover of this PC.
Connector: USB 2.0 Type A
Maximum permitted size of the USB stick: 11.5 mm x 28 mm x 88 mm - Front Panel connectors
1x Microphone input (3.5 mm)
1x Headphones output (3.5 mm, line out)
2x USB 3.0
2x USB 2.0
1x Power button with Power LED (blue)
1x HDD LED (yellow) - Back Panel connectors
1x HDMI 1.4 digital audio/video output, supports screw lock
1x VGA / D-Sub analog video output
4x USB 2.0
1x GigaBit LAN (RJ45)
1x Clear CMOS Button
2x Perforation for Wireless LAN antennas
1x Hole for Kensington Lock - Other onboard connectors
Power-on-after-power-fail (hardware solution by jumper) [1]
4x front connector for power button, LEDs, USBs, audio ports
4-pin fan connectors (occupied by the CPU cooling system)
4-pin USB 2.0 connector (occupied by the internal USB port)
2-pin connector for the CMOS/RTC battery (occupied)
2x 5-pin debug port - Supplied Accessories
Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC, TC)
Driver DVD
Bracket for one 2.5" drive with screws
External power adapter with 1.7 m power cord
VESA mount bracket (metal) supports 75x75 and 100x100 mm standard with four screws M4x10
Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
CPU heatpipe cooling system with heatsink compound - Optional Accessory
(1) Vertical stand (PS01)
(2) WLAN module (WLN-M) [4] - Environmental Specifications
Operating temperature range: 0~50 °C [2]
Relative humidity range: 10~90 % (non-condensing) - Conformity and Certifications
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star 5.0, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
[1] Power-on-after-power-fail
The BIOS setup provides a "power-on-after-power-fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why this PC also comes with a hardware-based solution. By removing the appropriate jumper J1, the system will start unconditionally once power is supplied.
[2] High ambient temperature
For high ambient temperature over 40 °C we strongly recommend to use SSDs instead of hard disk drives.
[3] Power connector for SATA drives
The supplied power cable for a SATA drive provides a voltage of 5 V. In very rare cases a 2.5" hard disk also requires a 12 V line, which is not supported.
[4] Optional Wireless LAN module
Shuttle offers the optional accessory "WLN-M" which adds WLAN IEEE 802.11ac and Bluetooth 4.0 functionality. This kit consists of an M.2 expansion card and two external antennas with appropriate cables.
