• Chassis
  H7-type aluminum chassis, color: black
  Front panel with glossy finish and painted, shining top cover
  storage bays: 1 x 5.25", 2 x 3.5" (1 internal)
  stealthed drive doors
  Dimensions: 32.5 x 20.8 x 18.9 cm (LWH), 12.8 litres
  Weight: 3.8 kg net / 5.2 kg gross
• Mainboard
  Shuttle FX58, Shuttle form factor, proprietary design for XPC SX58H7
  Chipset: Intel X58 Express (codenamed Tylersburg) + ICH10R (I/O Conroller Hub)
  Solid Capacitors for excellent heat resistance for enhanced system durability
• Power supply
  500 Watt mini PSU, AC input voltage: 100~240V
  80PLUS Bronze certified (>82/85/82% energy efficiency at 20/50/100% load)
  Active PFC circuit (Power Factor Correction)
• Processor support
  Socket 1366 supports
  Intel® Core™ i7 models 920 (2.66 GHz), 940 (2.93 GHz), 965XE (3.2 GHz)
  Please refer the support list for detailed processor support information:
  http://global.shuttle.com/support_list.jsp 
  The previous Front Side Bus (FSB) by the new QPI (QuickPath Interconnect)
  which features up to 6.4GT/s (3.2GHz) and a maximum transfer rate of 25.6GB/s.
  Supports Dynamic Overclock feature (DOC):
  Easily overclock function to be enabled through a simple BIOS setting. *)
• New heatpipe processor cooling
  Shuttle Integrated Cooling Evolution (I.C.Evo)
  New Vapor Chamber + Heatpipe Technology
  The vaporizing chamber is utilized as cooler base witch is similar to the thermal tubes operating principle. The thermal resistance of vapor chamber is twice lower than in usual base. At low fan speed this technology reduces the CPU temperature by 5~7°C.
• OASIS chipset cooling
  OASIS Cooling Technology: additional fanless heat-pipe design
  covering the MOSFET modules (VRM), north- and southbridge.
• Memory support
  4 x 240 pin slots, supports 3+1 channel configuration (Triple Channel)
  Supports DDR3-1066/1333 SDRAM memory
  Supports DDR3-1600 in overclocking mode *)
  Max. 4 GB per DIMM,  up to a total size of 16 GB
  Warning: DIMMs with voltage over 1.65V may damage your CPU. 
  Shuttle recommends you install the DIMMs with voltage setting below 1.6V.
• Slots
  2x PCI-Express x16 Version 2.0 expansion slots 
  for x16 graphics cards (full 16 lanes each slot)
  Supports Dual Graphics card by ATI CrossFireX™ or NVIDIA SLI™ Technology. 
  Two graphics cards can be used to enable 4-monitor-operating or ATI CrossFireX™ / NVIDIA SLI™ mode for leading-edge gaming performance.  ***)
  Supports two single-slot or one double-width graphics card.
• 8-channel audio
  7.1 channel High Definition Audio with Realtek ALC888 codec
  analog: line-out (8-ch), line-in, microphone, CD-in, AUX
  digital: optical S/PDIF-out
• Dual Gigabit LAN Controller
  2x RJ45 connectors supports Teaming-Mode**)
  Realtek RTL8111C Ethernet network controller
  IEEE 802.3u 1000Base-T compliant
  Supports 10 / 100 / 1.000 MBit/s operation
  Supports Wake-on-LAN
• Drive connectors
  Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
  3x internal (SATA) plus 3x external (eSATA)
  Intel Matrix Storage Technology enabled striping and mirroring
  Supports RAID mode 0, 1, 5, 10
  Supports Native Command Queuing (NCQ)
  1x IDE ATA 133 drives
• Front Panel connectors
  Microphone
  Headphone (Line-out)
  2x USB 2.0
  External Serial ATA Hotplug (eSATA)
  Power button
  Reset button
  Power indicator (blue LED)
  HDD indicator (orange LED)
• Back Panel connectors
  6x USB 2.0
  2x GigaBit LAN (RJ45)
  2x External Serial ATA Hotplug (eSATA)
  Power connector for two eSATA hard disks (incl. cable)
  8-ch Audio line-out (2x rear/front, bass/center, surround/back)
  Audio Line-in
  Digital Audio: optical S/PDIF output
  Clear CMOS button
• Optional Accessories
  Wireless LAN Antenna (PN20)
  PS/2 Mouse & Keyboard connectors (PS10)
• Other connectors
  6x USB 2.0 (three sets with 2x5 pins)
  2x fan connectors (4 pins and 3 pins)
  Headers for PS/2 mouse and PS/2 keyboard
• Accessories
  Driver CDROM
  Quick Installation Guide
  1x SATA cable
  1x Power cord
  2x2 pin to 2 eSATA power cable
  Screws
  Heatsink compound
• Conformity
  This device is classed as a technical information
  equipment (ITE) in class B and is intended for use in 
  living room and office. The CE-mark approves the 
  conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices 
  within certain voltage-limits 

*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
**) Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.
***) SLI support: At the time of the first delivery of the Shuttle XPC Barebone SX58H7 SLI certification for Intel chipsets could not be completed on behalf of Nvidia. It is expected to launch a BIOS update shortly to enable this function.