• Chassis
    Nettop PC with black chassis made of steel
    Dimensions: 190 x 165 x 43 mm (LWH) = 1.35 litre
    Weight: 1.3 kg net and 2.1 kg gross
    Two holes for Kensington Locks and numerous 
    threaded holes (M3) at both sides of the chassis
  • Storage bay
    1x 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive
    Device height: 12.5 mm (max.)
  • Operation System
    This system comes without operating system.
    It is compatible with Windows 10 / 8.1 / 7 and Linux.- 64 bit.
    Note: Windows 7 and 8.1 is only supported in combination with the 6th generation Intel Core processors "Skylake".
  • Mainboard / Chipset / BIOS
    Chipset: Intel® H110 Chipset
    (Intel® DH82H110 PCH, code name "Sunrise Point")
    Platform Controller Hub (PCH) as Single-Chip-Solution
    AMI BIOS in 8 Mbit EEPROM with SPI interface
    All capacitors are high quality solid capacitors
    Supports hardware monitoring and watch dog functionality
    Supports Unified Extensible Firmware Interface (UEFI)
    Supports power on after power failure [3]
  • Power Adapter
    External 90 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz
    Output: 19 V DC, 4.74 A, max. 90 W
    DC Connector: 5.5 / 2.5 mm (outer / inner diameter)
  • Processor support
    Socket LGA 1151 (H4) supports
    Intel Core i7 / i5 / i3, Pentium and Celeron processors
    - 6th generation, code name "Skylake"
    - 7th generation, code name "Kaby Lake" [6]
    Maximum supported processor power consumption (TDP) = 65W
    14nm process technology, up to 8 MB of L3 cache
    Not compatible with Intel Xeon E3 V5 processors for socket LGA1151 and processors with the older Socket LGA 1150.
    Does not support the unlock-function of Intel K-Series processors.
    The processor integrates PCI-Express, memory controller
    and the graphics engine on the same die (performance features 
    depending on processor type)
    Please refer to the support list for detailed processor support information at global.shuttle.com.
  • Processor cooling
    Heat-pipe processor cooling with two 60 mm fans on the upper side of the chassis
  • Memory support
    2x 260-pin SO-DIMM slot
    Supports DDR4-2133 (PC4-17000) SDRAM memory at 1.2 V
    Supports Dual Channel mode
    Supports max. 16 GB per DIMM,  maximum total size of 32 GB
    Supports two unbuffered DIMM modules (no ECC)
  • Integrated Graphics
    The features of the integrated graphics function
    depend on the processor type used.
    Two digital video outputs: DisplayPort 1.2 and HDMI 1.4
    - supports two independent Full HD displays simultaneously [3]
    - supports Full HD resolution at 1920 x 1200 (1080p / 60Hz)
    - supports 4K UHD resolution at 3840 x 2160 (max. 2160p / 60Hz on DP or max. 30 Hz on HDMI) [4]
    - supports Blu-ray (BD) playback with HDCP
    - supports HD video plus multi-channel digital audio via a single cable.
  • M.2-2260 M Slot
    The M.2 2260 M slot supports M.2 SSD cards with SATA interface
    It supports M.2 cards with a width of 22 mm
    and a length of 42 or 60 mm (type 2242, 2260).
    Cards with 80mm length (2280) are not supported.
  • M.2-2230 AE Slot
    The M.2 2230 AE slot provides the following interfaces:
    - PCI-Express v2.0 X1
    - USB 2.0
    It supports M.2 cards with a width of 22 mm and a length of 30 mm. This slot is intended for Wireless LAN (Wifi), Bluetooth, GSM/UMTS cards and others. A SATA interface for SSD cards is not available here.
  • Audio
    Audio Realtek® ALC 662 5.1 channel High-Definition Audio
    Two analog audio connectors (3.5 mm) at the front panel: 
    1) 2-channel line out (head-phones)
    2) microphone input
    Digital multi-channel audio output: by HDMI and DisplayPort
  • Gigabit LAN Controller
    Realtek 8111G Ethernet network controller (Gigabit)
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
  • Drive connectors
    1x Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
    With Serial-ATA power connector (onboard)
  • Card Reader
    Integrated card reader
    Supports SD, SDHC and SDXC memory flash cards
    Supports boot up from SD card
  • Front Panel connectors
    Microphone input
    Audio Line-out (headphones)
    2x USB 3.0
    2x USB 2.0
    SD card reader
    Power button
    Power LED (blue)
    HDD LED (yellow)
  • Back Panel connectors
    1x HDMI connector [1]
    1x DisplayPort connector (DP) [2]
    4x USB 2.0
    1x Gigabit LAN (RJ45)
    DC-input connector for external power adapter
    4-pin connector (2.54 mm pitch) supports
    - external power on button
    - Clear CMOS function
    - +5 V DC voltage for external components
    2x Perforation for optional Wireless LAN antennas
    2x hole for Kensington Locks
  • Other onboard connectors
    1x jumper for power on after power fail (hardware solution) [3]
    1x fan connector (4-pin) occupied by the cooling system
    1x connector for CMOS battery (occupied)
  • Supplied Accessories
    Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
    Four screws M3 x 4 mm (to mount a 2.5" storage device into the bay)
    Driver DVD (Windows 64-bit)
    Serial ATA cable for 2.5" drive including power cable
    External 90 W power adapter with power cord
    Protection cap for CPU socket (do not use if heat-pipe or fan is mounted)
    Heatsink compound
  • Optional Accessies:
    WLN-M: WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0
    PS02: Stand for vertical operation
    PV04: VESA mounting kit
  • Environmental Specifications
    Operating temperature range: 0~50 °C [5]
    Relative humidity, non-condensing: 10~90%
  • Low Power Consumption
    Exemplary measurement of the power consumption:
    - S3 mode: 0.81W
    - Idle mode: 9.9W
    - Full load: 61.5W / 79.6W (without/with graphics)
    Configuration: Core i5-6600, 2x 4GB DDR4-2133, 500GB SSD, Windows 7 64 bit
  • Certifications / Compliance::
    EMI: FCC, CE, BSMI, C-Tick
    Safety: ETL, CB, BSMI
    Other: RoHS, Energy Star, ErP
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2004/108/EC relating to electromagnetic compatibility (EMC),
    (2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)

Footnotes:

[1] HDMI output supports DVI-D with optional adapter
[2] How to convert DisplayPort into HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either through DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[3] Power on after power fail
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the DH110 also comes with a hardware-based solution. By removing Jumper JP2 (on the mainboard behind the power button) the system will start unconditionally once power is supplied.
[4] 4K Ultra-HD resolution
A 4K-display with Ultra-HD resolution (3840 x 2160) should only be connected via DisplayPort, as only this port supports a higher refresh rate of 60Hz. Certain displays (e.g. Dell UP2414Q) however require MST mode (Multi-Stream Transport) to be enabled which sends two separate images at half resolution each to the display. These two images are then combined and put in correct order by the Intel graphics driver when in Collage mode. Please note that HBR2-mode (High Bit Rate 2) must be supported by each display to have more than one of them run at 4K resolution.
[5] Note on operating temperature
For high ambient temperatures over 40 °C we strongly recommend to use SSDs (supporting at least 70 °C) and rugged SO-DIMM memory modules with a temperature range of up to 95 °C.
[6] Kaby Lake processor support
The 7th generation Intel Core processors "Kaby Lake" are supported from BIOS version DH110100.200. Download website:  http://global.shuttle.com/support/download
Note: If a Kaby Lake processor is used, this XPC will only support Windows 10 and Linux operating systems. Windows 7 and 8.1 will no longer be supported.

© 2020 Shuttle Europe | Infos légales | Contact | CGV | Protection des données | Plan du site