|
|
Expansion kit with 4G modem module and two antennas
With this accessory kit you can equip a compatible Shuttle XPC with a built-in 4G network function. This kit includes a 4G modem module, an M.2 adapter card and two antennas with cables. All you need is an activated Nano SIM card. Please note that when used with DL10J, the M.2-2230 slot is used for this purpose and any existing WLAN cards must first be removed from the PC.
|
|
- Contents:
- 4G modem-module
- M.2 adapter card (LN004)
- Fastening screw for 4G modem module (two-parts)
- 2x external LTE/4G antennas
- 2x antenna cables with toothed lock washer and screw nut
- Quick installation guide - 4G modem module
Model: Huawei ME906s-158 (for Europe)
Form factor: 30 x 42 x 2.3 mm (HWD), 75-pin M.2/NGFF
LTE data transfer rate: max. 150/50 Mbps @ 20MHz Bandwidth Cat4
Further information at www.huawei.com - M.2 adapter card:
Riser card for the M.2-2230 Key E slot
Dimensions: 30 x 30 mm
- supports one 4G module M.2-3042 Key B
- supports one SIM card in Nano format - Two external antennas:
LTE/4G dipole omnidirectional antenna
Multi-band: supports EU frequency bands (800, 1800, 2600 MHz) for GSM/UMTS/LTE and the following frequency ranges: 704~960, 1428~1575, 1720~2170, 2400~2690 MHz
Colour: black
Length overall: 135.7 mm
Dimensions of the antenna body: 114.8 mm x 20.1 mm
Impedance: 50 Ohm
Voltage Standing Wave Ratio (VSWR): <= 3.0
Radiation: Omni
Gain: 2 dBi
Polarisation: vertical
Connector: SMA - Two antenna cables:
RF cable lengths: 20 cm
Connectors:
1) SMA Pigtail female
2) I-PEX MHF 4 - Compatibility:
The WWN11 accessory kit can be used for
- Shuttle XPC slim DL10J
- Shuttle Edge EN01J3, EN01J4, EN01E (adapter card is not required)
Supported operation system: Windows 10
Note that you also need a SIM card in Nano format
|
