500W Power Supply for Shuttle XPCs

The Shuttle XPC Accessory PC63J is a new high-end power supply with a maximum output wattage of 500W suitable for certain XPCs of the H, J and R series. With a low noise level of only 30dB, it is ideal for use in any noise-sensitive environments such as a library and offices. Thanks to its 80 PLUS Bronze certification for power-efficient devices, this power supply is also suitable for ENERGY STAR® compliant systems. Benefit from less power consumption and less energy costs using PC63J.

  • Model: Shuttle XPC Accessory PC63J (power supply)
  • Output wattage:
    Total combined output is 500W max.
    Total combined output of 3.3V and 5V is 130W max.
    Active PFC circuit (Power Factor Correction)
  • Input Voltage/Frequency range:
    100~240V AC, 50/60Hz
    (90~264V AC, 47~63 Hz)
  • Input current:
    max. 8A/4A for 115V/230V AC during normal operating
    Inrush current: 60A/90A for 115V/230V AC
  • DC voltage output, max. output current:
    +12V1: 16A
    +12V2: 16A
    +12V3: 17A
    +3.3V: 18A
    +5V: 16A
    +5VSB: 2.5A (Standby)
    -12V: 0.3A
  • Power Connectors:
    1x ATX power with 20 pins
    1x ATX 12V power with 4+4 pins *)
    1x PCIe power with 6 pins
    1x PCIe power with 6+2 pins
    3x Serial ATA power
    2x Molex power
    1x Floppy power
  • Output voltage timing:
    Hold up time: >17ms at full load at 115V AC
    Rise time: <20ms at full load, nominal line
  • Protection:
    Short circuit protection (SCP) - Latch off
    Overpower (overload) protection (OPP)
    Overcurrent protection (OCP)
    Overtemperature protection (OTP)
    Overvoltage protection (OVP)
    Undervoltage protection (UVP)
  • Efficiency:
    80PLUS Bronze compliant
    The PSU provides at least 82/85/82% efficiency at 20/50/100% load.
  • Certification:
    EMI/RFI: FCC class B, CE, BSMI, CCC
    Safety: cUL, TÜV type approved, CB, BSMI, CCC
    Timing, housekeeping and control conform Intel ATX12V Specific Guidelines 2.3
  • Mean Time Between Failures (MTBF)
    > 100.000 hours at 75% load, 25°C
  • Temperature:
    Operating temperature: +10°C ~ +50°C
    Storage temperature: -40°C ~ +70°C
  • Noise:
    <30dB at 50cm for 200W load
    50mm ball bearing fan with thermal Fan-speed control
  • Dimensions: 200 x 82 x 53 mm (LWH)
  • Scope of delivery: power supply and 4 screws
  • Weight: net weight: 1.1 kg, gross weight: 1.2 kg
  • Compatibility:
    Supported Shuttle XPC models:
    H series: SH67H3, SH67H7, SN78SH7, SG45H7, SP45H7, SX58H7(Pro)
    J series: SG41J1/J4, SH55J2, SX58J3
    R series: SH61R4, SH81R4, SZ68R5, SZ77R5, SX79R5, SH87R6, SZ87R6, SH97R6, SH110R4, SH170R6 (Plus), SZ170R8(V2), SZ270R8, SZ270R9, SH310R4(V2), SH370R6(V2)(Plus)
    Cable lengths designed for the Shuttle XPC.

*) Universal ATX12V plug
The ATX12V plug of the power supply consists of two 4-pin plugs, which can be combined to one single 8-pin plug. They can easily be separated again by using long-nosed pliers.

Power Supply PC41J PC61J PC63J
Output wattage 250W 300W 500W
Efficiency-Logo Standard 80 PLUS Bronze 80 PLUS Bronze
Additional power
connectors for
graphics cards
not available

(since Part-No. 
…F002 with 
6 pin. (75W)
6 pin (75W) und 6+2 pin (150W)
Shuttle XPCs
Standard power supply 
for SG41J1/J4-Series
and SH61R4
Upgrade kit for SG41J1/J4-Series
and SH61R4,
Standard power supply for  SH55J2
Upgrade kit for SG41J1/J4-Series,
and SH55J2
Standard power supply for SX58J3 and SZ68R5
© 2020 Shuttle Europe | Legal notice | Contacto | CCG | Protección de datos | Mapa del sitio