- Chassis
Slim PC with black chassis made of metal
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre
Weight: 1.03 kg net and 2.2 kg gross
Two holes for Kensington Locks and numerous
threaded holes (M3) at both sides of the chassis - Operation System
This barebone system comes without operating system.
It is compatible with Windows 10 (64-bit) and Linux (64-bit). - Processor
Model: Intel Celeron 3865U (ULV)
System-on-a-chip architecture (SoC): no chipset required
BGA1356 package - directly soldered onto the mainboard
Code name: Kaby Lake-U (7th Generation Intel Core)
Cores / Threads: 2 / 2
Clock rate: 1.8 GHz
L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
TDP wattage: 15 W maximum
Manufacturing process: 14 nm
Maximum Tjunction Temperature: 100 °C
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2 - NVIDIA Graphics Card
Graphics Processing Unit: NVIDIA® GeForce® GTX 1050 (Pascal™ architecture)
640x CUDA™ v6.1 Cores at 1354 MHz graphics clock
Supports DirectX 12, OpenGL 4.5, OpenCL 1.2, HDCP 2.2
Video outputs: 4x HDMI 2.0b
Supports up to 4 independent Ultra HD displays at the same time
Graphics resolution: max. 4096 x 2160 @ 60 Hz (2160p60) each port
Video memory: 4 GB GDDR5 VRAM 128-bit, 3500 MHz, max. 112 GB/s
Slot / Bus Type: MXM 3.0 Type A with PCIe X4 interface - Mainboard / BIOS
Shuttle Mainboard FS02U
All capacitors are high quality solid capacitors
AMI BIOS in 8 MByte Flash EEPROM with SPI interface
Supports resume after power failure [3]
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports boot from M.2 SSD cards and USB devices
Supports hardware monitoring and watch dog function
Supports Unified Extensible Firmware Interface (UEFI)
Supports Firmware-TPM (fTPM) Version 2.0 - Memory support
2x SO-DIMM slot with 260 pins
Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 16 GB per DIMM,
maximum total size: 32 GB
Supports two unbuffered DIMM modules (no ECC or registered) - 2.5" Drive Bay with SATA connector
Supports one Serial ATA hard disk
or one SATA SSD drive in 6.35 cm / 2.5" format
Device height: max. 12.5 mm
Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
Supports Unified Extensible Firmware Interface (UEFI)
Note: a serial ATA cable is pre-installed - M.2-2280 M Slot for SSDs
The M.2 2280 M slot provides the following interfaces:
- PCI-Express v2.0 X4 supports NVMe
- SATA v3.0 (6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key) - M.2-2230 AE Slot
The M.2 2230 AE slot provides the following interfaces:
- PCI-Express v2.0 X1
- USB 2.0
It supports M.2 cards with a width of 22 mm and a length of 30 mm. This slot is intended for Wireless LAN (Wifi), Bluetooth, GSM/UMTS cards and others. A SATA interface for SSD cards is not available here. - Audio
Audio Realtek® ALC 662 High-Definition Audio
Two analog audio connectors (3.5 mm) at the back panel:
1) 2 channel line out (headphones)
2) microphone input
Digital multi-channel audio output: via HDMI - Gigabit LAN
Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE) - Front Panel connectors and LEDs
2x USB 3.0
2x USB 2.0
Power button
Power LED (blue)
HDD LED (yellow) - Back Panel connectors
4x HDMI 2.0b (with screw holes for connectors with locking screws)
2x USB 3.0
1x Intel Gigabit LAN (RJ45)
1x D-Sub connector for serial COM port (RS232)
1x Microphone input
1x Audio Line-out (headphones)
1x DC-input connector for external power adapter
4-pin connector "SW2" (2.54 mm pitch) for power button, Clear CMOS and 5 V DC [1] - Always-On Jumper
By removing Jumper JP1 (please refer to the quick user guide)
the system will start unconditionally once power is applied. [3] - Other onboard connectors
1x serial RS232 interface / COM port (2x5-pin occupied)
2x fan connectors (4-pin) occupied by CPU and GPU cooling fans
1x connector for CMOS battery (2-pin, occupied)
1x USB 2.0 header (Pitch distance: 1.25 mm, 4-pin, available)
1x Audio Input/Output (2x7-pins, available)
1x analog VGA graphics output CN2 (2x 1-pin, 1 mm pitch) [4] - Power Adapter
External 120 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.8 A
Output: 19 V DC, max. 6.32 A, max. 120 W output wattage
AC Connector with protective-earth contacts, cable length: 1.7 m
Level VI efficiency class - DC Input connector
DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external power source with 19V±5%. - Scope of Delivery
Multi-language user guide
Driver DVD for Windows 10 (64-bit)
VESA mount for 75/100 mm standard (two metal brackets)
Four screws M3 x 7 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to fix the VESA mount to the external surface)
Four screws M3 x 4 mm (to mount a 2.5" storage device into the bay)
Two screws M3 x 5 mm (silver colour, to mount two M.2 cards)
External 120 W power adapter with DC cable
3-pin AC power cord with protective-earth contacts, cable length: 1.7 m - Optional Accessories
- WLN-M: Wireless LAN kit supports IEEE 802.11ac and Bluetooth 4.0
including M.2-2230 WLAN card and two external antennas with cables
- PS02: Stand for vertical operation
- CXP01: adapter cable for external power button
- PRM01: 2U rack mount front plate for two Shuttle XPC slim PCs - Environmental Specifications
Operating temperature range: 0~50 °C [2]
Relative humidity, non-condensing: 10~90 % - Conformity & Certifications
EMI: CE, FCC, BSMI, VCCI, RCM
Safety: CB, BSMI, ETL
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC)
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD)
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
Footnote:
[1] Four-pin header at the back panel
This header allows for connecting an external power button.
It also provides 5 V DC voltage for external devices and the Clear CMOS function. Optional accessory: the adapter cable CXP01.
[2] Caution: for high ambient temperatures higher than 35 °C we strongly recommend to use an SSD instead of an HDD
[3] Power-On-after-Power-Fail:
The BIOS setup provides a "Power-On-after-Power-Fail" function that can be found under "Power Management Configuration". This function determines the PC's behaviour after power failure. As a matter of the nature of this function, it may fail after short power failures. This is why the Shuttle XPC slim Barebone DH02U also comes with a hardware-based solution. By removing Jumper JP1 (please refer to the quick user guide) the system will start unconditionally once power is applied.
[4] Onboard VGA connector CN2
The onboard VGA connector can only be used if the NVIDIA graphics card is removed. This port is disabled by default.
