- Fanless and silent
Passive heatpipe cooling, absolutely no fan noise
Perfect for noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free - 24/7 nonstop operation
This device is approved for 24/7 permanent operation.
Requirements:
- Free circulation of air amongst the PC must be guaranteed.
- Ventilation holes must be kept clear.
- If a hard disk is installed, this must also be approved for permanent
operation by its manufacturer. - IP54 protectioned
The front panel is dust-protected and protected from
splashing of water according to protection class IP54. - Chassis
Colour: black or white
Dimensions: 487 x 321 x 44 mm (W x H x D)
100 mm VESA mountable
Hole for Kensington lock
Weight: 4.29 kg net, 5.62 kg gross - Operating system
This system comes without operating system.
It is compatible with:
- Windows 10 - 64-bit
- Linux - 64-bit - Touchscreen
Touchscreen function supports fingertip input
Capacitive Touch Panel with 10-point multi-touch
Supports input with gloves (PVC, cotton, cotton/linen)
Stylus pen not supported - 49.5 cm display (19.5")
49.5 cm / 19.5" LCD display
Ratio: 16:9 wide-screen panel
Resolution: 1600 x 900 = 1.44 Megapixel (WSXGA/HD+) - Processor
Model: Intel Celeron 3865U (ULV)
System-on-a-chip architecture (SoC): no chipset required
BGA1356 package - directly soldered onto the mainboard
Code name: Kaby Lake-U (7th Generation Intel Core)
Cores / Threads: 2 / 2
Clock rate: 1.8 GHz
L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
Memory controller: DDR4-2133 Dual Channel (1.2 V)
TDP wattage: 15 W maximum
Manufacturing process: 14 nm
Maximum Tjunction Temperature: 100 °C
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
Integrated graphics engine - Integrated Graphics
Intel HD Graphics 610
GPU clock frequency: 300~900 MHz
Execution Units (EUs): 12
Supports DirectX 12
Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology - Up to three displays simultaneously
Two video ports support two additional independent screens:
1) HDMI 1.4b supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
Multi-Monitoring modes as follow:
Clone mode: All displays show the same content at 1600 x 900.
Extended mode: all displays show different content. - BIOS
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports Power-on-after-power-fail / always on
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports hardware monitoring and Watchdog function
Supports Firmware TPM v2.0 function - Memory
4 GB DDR4 SO-DIMM memory with 260 pins
Supports a maximum of 16 GB DDR4-2133 (PC4-17000) SDRAM per DIMM slot, maximum total size: 32 GB - Hard disk drive
500 GB hard disk drive in 2.5" format with SATA interface - M.2-2280 Slot
The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4 with up to 32 Gbps of data transfer speed
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key) - Card Reader
Integrated card reader supports SD, SDHC and SDXC memory flash cards - Webcam
Integrated Full HD webcam (1920 x 1080 pixels) - Microphone and speakers
Front panel with integrated Electret Condenser Microphone and
2x 2 W speakers - Integrated Audio
Realtek ALC269 Audio Codec
Two analog audio connectors (3.5 mm) on the bottom side:
1) Line-out (head-phones)
2) Microphone input
Digital Audio is supported via HDMI. - Wired Network
Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL) from S3, S4 modes
Supports network boot by Preboot eXecution Environment (PXE) - Wireless Network (WLAN)
Model: AzureWave AW-CB209NF
Chipset: Realtek RTL8821AE
M.2-2230 (NGFF) extension card
Connected with two internal antennas (via IPEX4)
Supports WiFi IEEE 802.11b/g/n/ac in the 2.4/5 GHz band, 1T1R
Max. 72.2 / 150 Mbps using 20 / 40 MHz bandwidth in n-mode
Max. 433.3 Mbps using 80 MHz bandwidth in ac-mode
Supports Bluetooth 4.1 in the 2.4 GHz band (BT 4.0 under Linux) - Front LEDs
Power LED (blue)
Hard disk LED (orange) - Connectors left side
Power button
2x USB 2.0
SD card reader
Hole with power button
Perforation for optional WLAN/LTE antenna (diameter: 7 mm) - Connectors bottom side
HDMI 1.4b (supports digital video and digital audio)
2x USB 3.0
2x USB 2.0
Gigabit Network (LAN, RJ45)
Audio Line-out / head-phones (3.5 mm jack)
Microphone input (3.5 mm jack)
DC input for external power adapter (5.5 / 2.5 mm)
Perforation for optional WLAN/LTE antenna (diameter: 7 mm)
Optional: 2x COM/serial (RJ45), DIO (RJ11) for cash drawer (accessory POS01) - Connectors rear side
VGA connector (D-Sub 15 pol., analog video)
Optional: 2x COM/serial (D-Sub), 1x LPT/parallel (accessory: PCL71 or POS01) - Connectors onboard
Internal USB 2.0 type A connector for a USB stick
Serial ATA (6 Gbps)
Serial ATA power connector
3x USB 2.0 header (all occupied)
eDP connector (Embedded DisplayPort) - occupied by the display
Connector for optional COM/LPT adapter POS01 or PCL71 - Opening holes for optional antennas
The chassis features two perforated 7 mm holes
for optional antennas mounted with an (RP-)SMA connector
for wireless network such as WLAN or WWAN (e.g. LTE) - Power adapter
External 65 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W - DC Input connector
DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external
power source with either 12V ±5 % or 19V ± 5%. - Included Accessories
Quick Guide
Driver DVD
External Power Adapter (65W / 19V)
Power cord
Screws - Optional Accessories
PCL71: COM / LPT / RJ11 adapter:
- 1x Parallel (25p D-Sub)
- 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
POS01: COM / LPT / RJ11 adapter:
- 1x Parallel (25p D-Sub)
- 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
- 2x Serial RS232 (8p RJ45)
- 1x DIO/RJ11 connector for cash drawer supports 12 / 24V
PNFC02: NFC module (no Linux and transaction support)
- Note: PNFC02 is only available on request - Environmental criteria
Operating temperature: 0~40 °C
Humidity: 10~90 % - Certification and Compliance
EMI: CE, RED, FCC, RCM, VCCI
Safety: CB, ETL
Other compliances: RoHS, ErP Lot3, Energy Star v7.0 - Conformity
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2014/30/EU relating to electromagnetic compatibility (EMC),
(2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EU relating to ecodesign requirements for energy-related products (ErP),
(4) 2014/53/EU related to Radio and Telecommunications Terminal Equipment (RED)
