 |
|
|
|
|
|
|
|
 |
|
|
|
|
- Chipset
SiS645 for Pentium 4 processors with socket 478
Northbridge: SiS645 und Southbridge: SiS961
Active Northbridge-fan
- Socket 478 CPU Support
Intel Pentium 4 processor (Willamette or Northwood) and P4 Celeron
with 400MHz FSB (100MHz Quad-Datarate-Process)
FSB-adjustments: 100, 105, 108, 112MHz
successfully tested with: P4 Celeron up to 1,8 GHz, P4 (Willamette 256KB Cache) up to 2,2GHz and
P4 (Northwood 400MHz FSB) up to 2,4GHz
- Expansion Slots
1 x AGP (v2.0) Steckplatz supports 4X mode
5 x 32 Bit PCI (v2.2)
- Onboard IDE Controller
2-Channel Enhanced PCI IDE
for up to 4 IDE devices
supports UltraDMA/100
incl. ATA-100-Kabel
- IDE RAID Controller, UDMA/133
Chip: High Point 372, supports UltraDMA/133
supports RAID-mode 0 and 1 (even simultaneously)
with two IDE-connectors for up to 4 hard disks
- Integrated Multichannel Hardware Audio Function:
C-Media 8738 Hardware-Audio-Controller
supports 5.1 sound system, C3DX Positional Audio in 6-channel-speaker-mode
HRTF-3D Positional Audio, supports Direct Sound 3D and A3D-interface
Legacy SBPRO compatible
Connectors on the backpanel: line-in, line-out, microphone, MIDI/gameport, line in/out
Connector on the bracket: for bass/center, bracket optionally in delivery
Multichannel operation: line-out = front, line-in = rear and onboard connector for bass/center
More line-ins on the mainboard Audio-in for CD-ROM and AUX.
- Backpanel-connectors
1 x PS/2-Mouse
1 x PS/2-Keyboard
1 x Parallel (SSP/EPP/ECP)
2 x Serial (16550 compatible, Fifo)
2 x USB (four more onboard)
Audio: line-in, line-out, microphone, MIDI/gameport
- Onboard-connectors
1 x Floppy drive (up to 2,88 MB)
4 x USB (additional)
1 x Infrared (COM2 can be used for infrared communication, IrDA-adapter not included in delivery)
1 x WOL (Wake on Lan)
1 x CD-in and 1 x Audio-AUX
4 x Fan (CPU, AGP, Chipset)
- Memory
3 x 184-pin DIMM-Socket for PC1600, PC2100 or PC2700 DDR SDRAM memory
supports module sizes of 64, 128, 256, 512 and 1024MB
with 100, 133 or 166MHz clock frequency up to 3GB capacity
Note: in case of use of two double-sided PC2700-modules, the third slot will have to stay blank!
- Hardware-monitoring
CPU-temperature, system voltage and fan revolution can be monitored
- Power Management
ACPI Version 1.0 (Advanced Configuration and Power Interface)
supports power saving modes: S1 (POS, Snoop), S3 (Suspend to RAM), S5 (Soft-Off)
and Suspend to Disk
On/Off-button with two functions: Suspend-Sparmodus / soft-off
State after Power Failure: Auto/Off
- BIOS
Award V6.0PG BIOS, supports "Green PC" and Desktop Management Interface (DMI)
2 MBit Flash EPROM
- ATX-power supply connector
Standard 20-pin-ATX-power supply
Additional 4-pin-connector for 12V
Additional 6-pin-connector for 3,3 and 5V
- Accessories
Mainboard with active Northbridge-cooler, IDE-cable (ATA-100), floppy cable, detailed manual, driver CD-ROM, bracket-adapter for audio bass/center-connector, optional USB-adapter
- Form Factor
ATX: 30,5 x 24,4 cm | |
|
  | |
|
|
|
|
 |
|
|
|
|
|
|
|
| Recherche |
|
|
|
|
|
|
| Liens intéressants |
|
|
| Newsletter Shuttle |
|
|
|
|
|
Shuttle StoreLocator |
|
|
|
|
 |
| La série K est la meilleur marché des séries de modèles Mini-PC de Shuttle. La série K est idéale pour la bureautique et les applications simples de tous les jours. | |
|
|
|
|