SG31G2 Silver (Glamor Series)

• Chassis
  G2-type aluminum chassis, silver color
  Storage bays: 1 x 5.25", 2 x 3.5" (1 internal)
  Dimensions: 30 x 20 x 18.5 cm (LWH),
  Weight: 3.3 kg net / 4.6 kg gross
• Mainboard
  Shuttle FG31, Shuttle form factor, 
  Proprietary mainboard design for Shuttle XPC Barebone  SG31G2
  Chipset: Intel G31 Express (Bearlake-G) + ICH7
  Dimensions: 25.4 x 18.5 cm
• Power supply
  250 Watt mini power supply unit
  Input voltage range: 100~240V
  Connectors: 20-pin ATX, 4-pin ATX12V
  Dimensions: 190 (L) x 82 (W) x 43 (H) mm
  EMI certified: FCC, CE, BSMI, CCC
  Safety certified: UL, TÜV, CB, BSMI, CCC
  Active PFC (Power Factor Correction)
• Processor support
  Socket 775 supports Single, Dual and Quad Core processors from Intel
  with Core technology (65nm Conroe) and 800, 1066 or 1333 MHz front side bus:
  i.e. Core 2 Quad, Core 2 Duo E6xxx / E4xxx, Pentium 2xxx and Celeron D 4xx
  Supports Pentium 4/D processors at 800MHz FSB.
  Processors with 533MHz FSB are not supported.
  Please refer the support list for detailed processor support information.
• Overclocking*)
  Overclocking settings:
  CPU frequency, CPU voltage, RAM frequency, RAM voltage
  Dynamic Overclock feature:
  Easily overclock from 3/5/7/10/15/20% through the BIOS.
• Processor cooling
  Shuttle I.C.E. (Integrated Cooling Engine)
  advanced I.C.E. Heatpipe technology, linear controlled 92mm fan
  SilentX cooling and noise reduction technology with Active Airflow
• Memory support
  2 x 240 pin slots, supports Dual Channel
  supports DDR2-667/800 SDRAM memory 
  up to a total size of 4 GB, max. 2 GB per DIMM
  Integrated LED to display Single/Dual channel status
• Slots
  1 x PCI-Express (16X) supports 8 GB/s data transfer
  1 x PCI (32 Bit)
• Integrated Graphics
  Intel Graphics Media Accelerator 3100 (GMA 3100)
  256bit 3D engine with a powerful 400MHz core
  DirectX 9.0 support
  Dynamic Video Memory Technology (DVMT) 3.0
  Shared Memory size up to 384MB
  Dual View - two video outputs can be used at the same time:
  Analog D-Sub VGA and digital DVI
• 8-channel audio
  7.1 channel High Definition Audio, Realtek ALC888 codec
  analog: line-out (8-ch), line-in, microphone
  Optional digital SPDIF I/O (PC17)
• Gigabit LAN Controller
  Marvell 88E8056 Ethernet network controller (Gigabit)
  Supports 100 / 1.000 MBit/s operation
  Supports Wake-on-LAN (WOL)
• Firewire Controller
  Firewire controller TI TSB43AB22A
  IEEE1394 OHCI V1.0 compliant
  with 2 Firewire connectors (front and rear)
  supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
• Drive connectors
  3x Serial-ATA II, 3 Gbit/s (300 MB/s) bandwidth
  1 x IDE ATA 100 drives
  1 x floppy disk drive 
• Front Panel connectors
  Microphone
  Headphone (Line-out)
  2x USB 2.0
  Firewire (Mini 4 pin connector)
  Power button
  Reset button
  Power LED
  HDD LED
• Back Panel connectors
  DVI output (digital)
  VGA output (D-sub, analog)
  4x USB 2.0
  GigaBit LAN (RJ45)
  IEEE1394 Firewire (6 pin)
  PS/2 keyboard
  PS/2 mouse
  8-ch Audio line-out (2x rear/front, bass/center, surround/back)
  Audio Line-in
  CMOS button
  optional Wireless LAN module (PN18)
  optional parallel port (PC8/PC15)
• Other connectors
  2x fan connectors (3 pin and 4 pin header)
  2x USB 2.0 (2x5 pin header)
• Accessories
  Multi-language user guide,
  Driver CDROMs (Windows Vista, Windows XP 32/64 bit) 
  Shuttle Extras CDROM,
  I.C.E. heat-pipe module,
  Cable for FDD, SATA (1x), PATA (1x)
  Power cord,
  Screws, Heatsink Compound
• Conformity
  This device is classed as a technical information
  equipment (ITE) in class B and is intended for use in 
  living room and office. The CE-mark approves the 
  conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices 
  within certain voltage-limits 

*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.