PC62

External AC/DC power adapter

• Fanless design
• Input
  Input voltage: 100~240V AC
  Input current: 4A max.
  Input frequency: 50~60Hz
• Output
  Output voltage: 12V DC
  Output current: 18A max.

Internal DC/DC power adapter (CP15)

• Fanless design
  no moving parts
• Input
  Input voltage: 12.0~12.6V DC
  Input current: 18A
• Output
  Max. output wattage: 200W
  

  Voltage	Regulation	Min. Load	Max. Load	Ripple*	Ripple & Noise*
  +5V	5.1V +/- 5%	0 A	10 A	50 mV	100 mVpp
  +12V	+/- 5%	1.0 A	16 A	120 mV	200 mVpp
  -12V	+/- 10%	0 A	0.3 A	120 mV	200 mVpp
  +3.3V	+/- 5%	0 A	10 A	50 mV	100 mVpp
  +5VSB**	+/- 5%	0 A	2.0 A	50 mV	100 mVpp

  *) peak-to-peak max. **) SB = Standby
  Total combined ouput wattage (3.3V, 5V, 12V) >= 200W
  Total combined ouput wattage (3.3V, 5V): >= 70W
  Hold up time: >16ms at full load
  Power good signal: TTL compatible

• Connectors
  ATX power 20 pin
  ATX power 12V_A 4 pin
  2x S-ATA
  3x Molex for two hard disks and one optical drive
  1x Floppy
• Efficiency: >=90%
  Energy Star V4.0 Ready
• Dimension: 190 x 82 x 43 mm (LWH)
• Protection:
  Short circuit protection (SCP) - Latch off
  Overpower (overload) protection (OPP)
  Overcurrent protection (OCP)
  Overtemperature protection (OTP)
  Overvoltage protection (OVP)
  Undervoltage protection (UVP)
• Environmental
  Operating temperature: 10°C ~ 50°C
  Storage temperature: -40°C ~ 70°C
• Mean Time Between Failures
  MTBF rating: > 100.000 hrs at 75% load, 25°C ambient
• XPC Compatibility
  This accessory is compatible with G, G2 und G5 chassis XPCs and the XPC model ST61G4, but not with SD11G5, SS58G2, SK83G, SN85G4, SN95G5 and ST20G5.