XPC SK43G

 

Mainboard FX43 only available in conjunction with XPC SK43G

• Chipset:
  VIA KM400/8235
  System clock: 100/133/166MHz (equivalent to 200/266/333 DDR)
  Socket 462 (Socket A) CPU support
  AMD Athlon XP processor for socket A with 200, 266 and 333MHz FSB
  Burn Proof CPU protection only for AthlonXP  (automatic power off if overheated)
• Expansion Slots:
  1 x AGP (v3.0) Slot supports 8X mode
  1 x 32 Bit PCI (v2.2)
• IDE-Interfaces
  Onboard IDE Controller for ATA133 and
  Serial ATA 150 with RAID-function level 0 or 1
• Multimedia:
  AC97 2.2 6-Channel sound
  Connectors on the backpanel: bass/center, line-out (front-out), rear-out
  Connectors on the frontpanel: microphone, line-out and line-in
  Onboard: SPDIF, Audio-in for CD-ROM and AUX.
• Networking:
  10/100MBit LAN
  Realtek 8100B chipset
• Backpanel-connectors:
  1 x PS/2-Mouse
  1 x PS/2-Keyboard
  1 x VGA
  2 x Serial
  2 x USB 2.0 (4 more onboard)
  2 x Firewire (IEEE1394)
  3 x Audio for 6-channel sound
  1 x  Network RJ45
  1 x TV-out (S-Video, Adapter to Composite)
  
• Onboard-connectors:
  1 x Floppy drive (up to 2,88 MB)
  4 x USB 2.0 (two more on the backpanel)
  1 x SPDIF
  1 x Infrared
  2 x Audio frontpanel connectors (microphone and line-out)
  1 x Bass/Center audio-out
  2 x CD-ROM audio-in
  1 x Audio-AUX
  3 x Fan (CPU, AGP, Case)
• Memory:
  2 x 184-Pin for PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) and PC3200 (DDR400) unbuffered DDR SDRAM memory
  with 100, 133, 166 and 200MHz clock frequency 2GB capacity
• Hardware-monitoring
  CPU-temperature, system voltage and fan revolution
  AutoGuardian-Function for revolution regulating
• Power Management
  ACPI Version 1.0 (Advanced Configuration and Power Interface)
  supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
  On/Off-button with two functions: Suspend-mode / soft-off
  Power on after power failure
• BIOS
  Award V6.0PG PnP Green BIOS
  stored in 2MBit Flash-memory chip
• ATX-power supply connector
  Standard 20-Pin-ATX-power supply connector + 4-pins
• Form Factor
  Flex/MicroATX: 25,4 x 18,5 cm
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits