XPC SS56G and SS56GV2

  

FS56 is only available in conjunction with XPC SS56G

• Chipset:
  Northbridge SiS 661FX, Southbridge SiS 963
  BUS: 100/133/200 MHz
• Processor-Socket
  Socket 478 supports Pentium 4, Celeron with 400, 533 and 800MHz FSB
  supports Hyper Threading
  (Pentium 4 with Willamette core is not supported,
  Northwood is supported,
  Prescott is supported since SS56G V2)
• Expansion slots:
  1 x AGP (v3.0) slot supports 8X mode
  1 x 32 Bit PCI (v2.2)
• Integrated Graphics Function
  SiS Real 256E (301C) graphics function, 64MB Shared Memory
• IDE-interfaces
  Onboard Dual-IDE controller with two ATA133 connectors
• Multimedia:
  AC97 2.2 6 channel sound
  Connectors on the backpanel: bass/center, line-out (front-out), rear-out
  Connectors on the frontpanel: microphone, line-out and line-in
  Onboard: SPDIF, Audio output for CD-ROM and AUX.
• Networking:
  10/100MBit LAN
  Realtek 8100B chipset
• Backpanel connectors:
  1 x PS/2 Mouse 
  1 x PS/2 Keyboard
  2 x Serial
  2 x USB 2.0 (more connectors onboard)
  2 x Firewire (IEEE1394)
  3 x Audio for 6 channel sound
  1 x  LAN RJ45
• Onboard connectors:
  1 x Floppy drive
  2 x USB 2.0 (more on the backpanel)
  1 x SPDIF
  2 x Audio frontpanel connectors (microphone and line-out)
  1 x bass/center audio-out
  2 x CDROM Audio-in
  1 x Audio AUX 
  3 x Fans (CPU, AGP, Case) 
• Memory:
  2 x 184-Pin für PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) and PC3200 (DDR400) unbuffered DDR SDRAM memory
  with 100, 133, 166 and 200MHz clock frequency up to 2GB capacity
• Hardware monitoring
  CPU temperature, voltage and fan revolution
  AutoGuardian function for revolution controlling
• Power Management
  ACPI Version 1.0 (Advanced Configuration and Power Interface)
  supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
  On/Off-button with two functions: Suspend-Sparmodus / soft-off
  Power on after power failure
• BIOS
  Award V6.0PG PnP Green BIOS
  stored in 2MBit Flash-memory chip
• ATX-power supply connector
  Standard 20-Pin-ATX-power supply connector + 4-pins
• Form Factor
  Flex/MicroATX: 25,4 x 18,5 cm
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits