|  | 
         Specification
  Chipset:VIA PT800 Northbridge / VIA VT8237 Southbridge
 System clock: 400/533/800MHz
CPU support Sockel 478 supports
 Intel Pentium 4 and Celeron processors
 with 400,533 or 800MHz FSB and Hyper-Threading support
Expansion slots:1 x AGP (v3.0) slot supports 8X Modus
 Important note: AGP-slot supports only 1,5V-mode
 4 x 32 Bit PCI (v2.2)
Onboard IDE controller2-channel enhanced PCI IDE for up to 4 IDE devices
 supports UltraDMA/133 (ATA133)
Serial-ATA controller2-channel Serial-ATA 150 for up to 2 hard discs
 supports RAID-mode
Multimedia:AC97 2.1 stereo sound
 Connectors on the backpanel: line-In, line-out, microphone, MIDI/gameport
 Further line-ins on the mainboard audio-in for CD-ROM and AUX.
Networking:10/100MBit LAN
 VIA VT6103
 Backpanel-connectors:1 x PS/2-Mouse
 1 x PS/2-Keyboard
 1 x Parallel (SSP/EPP/ECP)
 1 x Serial
 1 x LAN (RJ45)
 4 x USB 2.0 (4 more onboard)
 Audio: line-in, line-out, microphone
Onboard-connectors:2 x Serial-ATA150 RAID
 1 x Floppy drive (up to 2,88 MB)
 4 x USB 2.0 (4 more on the backpanel)
 1 x WOL (Wake on Lan)
 2 x Audio frontpanel-connectors (microphone and line-out)
 2 x CD-ROM audio-in
 2 x Fan (CPU, AGP)
Memory:2 x 184-pin slots
 for PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400) unbuffered DDR SDRAM memory
 with 100, 133, 166 resp. 200MHz clock frequency up to a total capacity of 2GB
 When using DDR400, then only one memory module is supported.
Hardware-monitoringCPU-temperature, system voltage and fan revolution
Power ManagementACPI Version 1.0 (Advanced Configuration and Power Interface)
 On/Off-button with two functions: suspend-mode / soft-off
BIOSAMI BIOS Version
 stored in 4MBit LPC Flash-memory chip
ATX-power supply connectorStandard 20-Pin-ATX-power supply connector and additional 4-Pin 12V-connector
Form FactorATX: 30,5 x 19 cm
                
            
              | Navigation |  |  |