Path: Home Mainboard AB48N/AB48PN
|
 |         |
Versions
 | AB48PN: supports 400/533/800MHz FSB (800FSB in overclocking mode) Imprint: AB48 V2.0 (see above) Version without network function: AB48P |
| AB48N: supports 400/533MHz FSB Imprint: AB48 V1.1 (see above) Version without network function: AB48 |
Specification
- Chipset:
Intel 845PE/ICH4 - Socket 478 CPU support
Intel Pentium 4 and Celeron processor for Socket 478 with 400 and 533MHz FSB
Mainboard AB48PN (v2.0) supports also 800MHz FSB in overclocking mode.
Prescott processors are not supported.
According to the specification the chipset is designed for max. FSB533, but thanks to
the special clock chip and the PCB layouts, the mainboard is well prepared for
operation in overclocking mode.
Mainboard supports Hyper-Threading
FSB infinitely adjustable (in 1 MHz steps) - Expansion slots:
1 x AGP (v2.0) slot supports 4X mode
Important note: AGP slot supports only 1,5V mode
5 x 32 Bit PCI (v2.2) - Onboard IDE Controller
2 Channel Enhanced PCI IDE
for up to 4 IDE devices
supports UltraDMA/100 - Multimedia:
AC97 2.2 6 Channel sound
Connectors on backpanel: line-in, line-out, microphone, MIDI/gameport, line in/out
More line-ins on the mainboard audio-in for CD-ROM (connector CN4 and CN12) and AUX (CN11). - Networking:
10/100MBit LAN
Realtek 8100B chipset
RJ45 network connector on the backpanel - Backpanel connectors:
1 x PS/2 Mouse
1 x PS/2 Keyboard
1 x Parallel (SSP/EPP/ECP)
2 x Serial
2 x USB 2.0 (4 more onboard)
Audio: line-in, line-out, microphone, MIDI/gameport - Onboard connectors:
1 x Floppy drive (up to 2,88 MB)
4 x USB 2.0 (two more on backpanel)
1 x Infrared (COM2 can be used for infrared communication, IrDA-adapter not included in delivery)
1 x WOL (Wake on Lan)
1 x SPDIF
2 x Audio frontpanel connectors (microphone and line-out)
1 x Bass/Center Audio-out
2 x CDROM Audio-in
1 x Audio (AUX)
3 x Fan (CPU, AGP, Case) - Memory:
2 x 184-Pin for PC1600 (DDR200), PC2100 (DDR266) and PC2700 (DDR333) and unbuffered DDR SDRAM memory
with 100, 133 resp. 166 clock frequency up to 2GB capacity
AB48PN also supports PC3200 (DDR400) memory with 200MHz clock frequency in overclocking mode.
Note: If the processor operates at 400MHz (533MHz), memory can only be run in DDR266 (DDR333)-mode.
At 800MHz FSB, DDR400 memory is required! - Hardware monitoring
CPU temperature, voltages and fan revolution - Power Management
ACPI Version 1.0 (Advanced Configuration and Power Interface)
supports power saving mode: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
On/Off button with two functions: Suspend-mode / Soft-off
Power on after power failure - BIOS
Award V6.0PG PnP Green BIOS
stored in 4MBit Flash-memory chip - ATX power supply connector
Standard 20-Pin-ATX-power supply connector - Form Factor
ATX: 30,5 x 19 cm
Print version of this page: http://eu.shuttle.com/ab48.htm
Shuttle Computer - European Headquarters - All rights reserved - Date:
30.4.2008