AV49PN

Socket 478, 800/533/400FSB
VIA PT800/8235 Chipset
Slots: AGP 8X, 4x PCI
ATA133 und Serial-ATA Raid,
USB2.0, DDR400, LAN,
AC'97, ATX Form Factor

Chipset: VIA PT800 Northbridge / VIA VT8237 Southbridge System clock: 400/533/800MHz CPU support Sockel 478 supports Intel Pentium 4 and Celeron processors with 400,533 or 800MHz FSB and Hyper-Threading support Expansion slots: 1 x AGP (v3.0) slot supports 8X Modus Important note: AGP-slot supports only 1,5V-mode 4 x 32 Bit PCI (v2.2) Onboard IDE controller 2-channel enhanced PCI IDE for up to 4 IDE devices supports UltraDMA/133 (ATA133) Serial-ATA controller 2-channel Serial-ATA 150 for up to 2 hard discs supports RAID-mode Multimedia: AC97 2.1 stereo sound Connectors on the backpanel: line-In, line-out, microphone, MIDI/gameport Further line-ins on the mainboard audio-in for CD-ROM and AUX. Networking: 10/100MBit LAN VIA VT6103 Backpanel-connectors: 1 x PS/2-Mouse 1 x PS/2-Keyboard 1 x Parallel (SSP/EPP/ECP) 1 x Serial 1 x LAN (RJ45) 4 x USB 2.0 (4 more onboard) Audio: line-in, line-out, microphone Onboard-connectors: 2 x Serial-ATA150 RAID 1 x Floppy drive (up to 2,88 MB) 4 x USB 2.0 (4 more on the backpanel) 1 x WOL (Wake on Lan) 2 x Audio frontpanel-connectors (microphone and line-out) 2 x CD-ROM audio-in 2 x Fan (CPU, AGP) Memory: 2 x 184-pin slots for PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400) unbuffered DDR SDRAM memory with 100, 133, 166 resp. 200MHz clock frequency up to a total capacity of 2GB When using DDR400, then only one memory module is supported. Hardware-monitoring CPU-temperature, system voltage and fan revolution Power Management ACPI Version 1.0 (Advanced Configuration and Power Interface) On/Off-button with two functions: suspend-mode / soft-off BIOS AMI BIOS Version stored in 4MBit LPC Flash-memory chip ATX-power supply connector Standard 20-Pin-ATX-power supply connector and additional 4-Pin 12V-connector Form Factor ATX: 30.5 x 19 cm