Path: HomeProductsMainboardsSocket 478VIA-chipsetMV42NSpecification

Mainboard MV42N

Specification

  • Chipset
    VIA P4M266 for Pentium 4 processors with socket 478
    Northbridge: VIA 8751 and Southbridge: VIA 8233
    Passive Northbridge-fan
  • Socket 478 CPU Support
    Intel Pentium 4 processor (Willamette or Northwood) and P4 Celeron
    with 400MHz FSB (100MHz Quad-Datarate-Process)
    successfully tested with: P4 Celeron up to 1,8 GHz, P4 (Willamette 256KB Cache) up to 2,2GHz and
    P4 (Northwood 400MHz FSB) up to 2,5GHz
  • Expansion Slots
    1 x AGP (v2.0) slot supports 4X Modus
    2 x 32 Bit PCI (v2.2)
    1 x CNR (Communication Network Riser)
  • Onboard IDE Controller
    2-Channel Enhanced PCI IDE
    up to 4 IDE devices
    supports UltraDMA/100
    incl. ATA-100-cable
  • Integrated Graphics-Function:
    S3 Savage4 AGP-graphics accelerator in Northbridge of chipset integrated
    uses memory with 32MB Shared Memory
  • Integrated Audio Function:
    Software-Audio with AC'97 2.2 conforming CODEC onboard
    The main work is done by software; the CODEC provides the analog signal
    Connectors on the backpanel: line-in, line-out, microphone, MIDI/gameport, line in/out
    More Line-ins on the mainboard: 2X Audio-in for CD-ROM
  • Integrated Networking
    Fast Ethernet MAC in Southbridge: VIA VT8233
    LAN PHY VT6103 conforming to IEEE802.3u, 100BASE-TX, 10BASE-T, ANSI X3.263 TP-PMD
    supports 10 and 100 MBit/s Fast Ethernet Operation with RJ45-connector on the backpanel
    Supports ACPI 1.0 and Power Management
  • Backpanel-connectors

    1 x PS/2-Mouse
    1 x PS/2-Keyboard
    1 x VGA
    1 x Parallel (SSP/EPP/ECP)
    1 x Serial (16550 compatible, Fifo)
    2 x USB (four more onboard)
    1 x RJ45 Ethernet network connector
    Audio: line-in, line-out, microphone, MIDI/gameport
  • Onboard-connectors
    1 x Floppy (up to 2,88 MB)
    4 x USB (two more on the backpanel)
    1 x Infrared (COM2 can be used for infrared communication, IrDA-adapter not included in delivery)
    1 x Wake-on-LAN (WOL)
    1 x Wake-on-Modem (WOM)
    2 x CD-in
    2 x Fan (CPU, System)
  • Memory
    2 x 184-Pin DIMM-Socket for PC1600/PC2100 DDR SDRAM memory at 2,5V
    2 x 168-Pin DIMM-Socket for PC100/PC133 SDR SDRAM memory at 3,3V
    supports memory modules of the sizes 64, 128, 256, 512 and 1024MB
    up to 2GB capacity
    Only one type of memory can be used simultaneously: either SDR or DDR
    Type of memory has to be adjusted by JP1 (voltage) and J2A/B/C/D (pullup). 
  • Hardware-monitoring
    CPU-temperature, system voltage and fan revolution can be monitored
  • Power Management
    ACPI Version 1.0 (Advanced Configuration and Power Interface)
    supports power saving modes: S1 (POS, Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
    On/Off-button with two functions: Suspend-Sparmodus / soft-off
    Keyboard Power On Jumper (JP2) to power on via keyboard
  • BIOS
    AMI BIOS
    2 MBit Flash EPROM
    supports Green PC, Desktop Management Interface (DMI), etc.
  • ATX-power supply connector
    Standard 20-Pin-ATX-power supply connector
  • Accessories
    Mainboard, IDE-cable (ATA-100), Floppy cable, detailed manual (69 pages), driver CD-ROM, backpanel-bracket (see picture above)
  • Form Factor
    ATX: 24,4 x 24,4 cm

 


Print version of this page: http://eu.shuttle.com/mv42n.htm
Shuttle Computer - European Headquarters - All rights reserved - Date: 30.4.2008