Path: HomeProductsMainboardsSocket 478SiS-ChipsetMS50/NSpecification

Mainboard MS50/N

Specification

  • Chipset
    SiS650 for Pentium 4 processors with socket 478
    Northbridge: SiS650 and Southbridge: SiS961
    Passive Northbridge-fan
  • Socket 478 CPU Support
    Intel Pentium 4 processor with Willamette- or Northwood-core and P4 Celeron
    with 400MHz FSB (Quad-Datarate-Process)
    successfully tested with: P4 Celeron with 1,8 GHz, P4 (Willamette 256KB Cache) up to 2,2GHz and
    P4 (Northwood 400MHz FSB) up to 2,4GHz
  • Expansion Slots
    1 x AGP (v2.0) slot supports 4X mode
    3 x 32 Bit PCI (v2.2)
  • Onboard IDE Controller
    2-Channel Enhanced PCI IDE
    for up to 4 IDE devices
    supports UltraDMA/100
    incl. ATA-100-cable
  • Integrated Graphics-Function:
    Integrated SiS-AGP-graphics accelerator in Northbridge of chipset
    uses memory with 64MB Shared Memory (adjustable: 4, 8, 16, 32, 64MB)
  • Integrated Audio Function:
    Software-Audio with AC'97 2.1 conforming CODEC onboard
    The main work is done by software; the CODEC provides the analog signal
    Connectors on the backpanel: line-in, line-out, microphone, MIDI/gameport, line in/out
    More line-ins on the mainboard Audio-in for CD-ROM, TAD and AUX.
  • Integrated Network-Function (MS50N only)
    Realtek 8100B network controller chip
    supports 10 and 100 MBit/s Ethernet operation
    with RJ45-connector (backpanel)
  • Backpanel-connectors
    1 x PS/2-Mouse
    1 x PS/2-Keyboard
    1 x VGA
    1 x Parallel (SSP/EPP/ECP)
    1 x Serial (16550 compatible, Fifo), one more connector onboard
    2 x USB (two more onboard)
    Audio: line-in, line-out, microphone, MIDI/gameport
  • Onboard-connectors
    1 x Floppy drive (up to 2,88 MB)
    2 x USB (two more on the backpanel)
    1 x Serial (bracket-adapter included in delivery)
    1 x Infrared (COM2 can be used for infrared communication, IrDA-adapter not included in delivery)
    1 x Wake-on-LAN (WOL)
    1 x CD-in, 1 x TAD and 1 x Audio-in (AUX)
    3 x Fan (CPU, AGP, Case)
    1 x RJ45 Ethernet network connector (optional)
  • Memory
    2 x 168-pin DIMM-Socket for SDR SDRAM memory
    supports module sizes of 64, 128, 256, 512 and 1024MB
    up to 2GB capacity
  • Hardware-monitoring
    CPU-temperature, system voltage and fan revolution can be monitored
  • Power Management
    ACPI Version 1.0 (Advanced Configuration and Power Interface)
    supports power saving modes: S1 (POS, Snoop), S3 (Suspend to RAM), S5 (Soft-Off)
    and Suspend to Disk
    On/Off-button with two functions: Suspend-mode / soft-off
  • BIOS
    Award V6.0PG  BIOS, supports "Green PC" and Desktop Management Interface (DMI)
    2 MBit Flash EPROM
  • ATX-power supply connector
    Standard 20-pin-ATX-power supply connector
    Additional square 4-pin-connector for 12V-supply "ATX12V"
    and further 4-pole-connector of a conventional power supply plug (see picture below)
  • Accessories
    Mainboard, IDE-cable (ATA-100), floppy cable, detailed manual, driver CD-ROM, bracket-adapter for second serial interface, optional USB-adapter
  • Form Factor
    ATX: 24,4 x 22 cm

 


Print version of this page: http://eu.shuttle.com/ms50.htm
Shuttle Computer - European Headquarters - All rights reserved - Date: 30.4.2008