Path: Home Products Mainboards Socket A MN31L Specification

Mainboard MN31L

Specification

Chipset:
NVIDIA nForce 2 Northbridge and MCP Southbridge
supports 200/266/333MHz FSB
CPU Support:
Socket 462 (Socket A)
supports AMD Athlon XP, Athlon and Duron processors with 200/266/333MHz FSB (up to 3000+)
Expansion slots:
1 x AGP (v3.0) slot supports 8X und 4X mode
Important note: AGP slot supports only 1,5V mode
3 x 32 Bit PCI (v2.2)
IDE Controller
Onboard Dual-Channel IDE Controller ATA133 (UDMA 133)
Multimedia:
6 Channel sound with Realtek ALC650 (AC97 v2.3)
Connectors on the backpanel: line-in, line-out, microphone, MIDI/gameport, line in/out
More connectors on the mainboard Audio connector for CD-ROM and AUX.
Graphics-Controller with 2 VGA output:
Northbridge with integrated GeForce4 MX graphics processor
High speed-256Bit-2D/3D-accelerator
nView Dual-Display architecture
Networking:
10/100MBit Network-Controller onboard
IEEE 802.3/803.2u conforming
supports nVIDIA MAC with Realtek 8201BL PHY
Backpanel connectors:
2 x VGA
1 x PS/2 Mouse
1 x PS/2 Keyboard
1 x Parallel (SSP/EPP/ECP)
1 x LAN
2 x USB 2.0 (4 further onboard)
Audio: line-in (resp. rear), line-out (resp. front), microphone (resp. center/bass), gameport
Onboard connectors:
1 x Floppy drive (up to 2,88 MB)
2 x ATA133
4 x USB 2.0 (two more on backpanel)
2 x Serial (COM)
2 x CD Audio Connector
1 x AUX
1 x SPDIF-out (2x5 Pins)
1 x Audio Connectors (2x5 Pins + 4 Pins for Center/Bass)
3 x Fan (CPU, AGP, Case)
1 x IrDA Infrared interface
Memory:
3 x 184-Pin DIMM slots
for PC1600 (DDR200), PC2100 (DDR266) and PC2700 (DDR333)
unbuffered DDR SDRAM memory with 2,5 Volt and
with 100, 133 or 166MHz clock frequency up to 3GB capacity
BIOS
Award PnP BIOS v6.0PG
stored in 2MBit Flash memory chip
Bootable from floppy drive, ATAPI, USB and SCSI
ATX power supply connector
Standard 20-Pin-ATX power supply + 4-Pin-ATX12V
Form Factor
MicroATX: 24,4 x 24,4 cm