Path: HomeProductsMainboardsSocket AMK40VNSpecification
Mainboard MK40VN
Specification - Chipset:
VIA KM400 Northbridge and 8235 Southbridge supports 200/266/333MHz FSB - CPU support:
Socket 462 (Socket A) support AMD Athlon XP, Athlon and Duron processors with 200/266/333MHz FSB (up to 3000+) - Expansion slots:
1 x AGP (v3.0) slots support 8X and 4X mode Important note: AGP slots supports only 1,5V mode 2 x 32 Bit PCI (v2.2) 1 x CNR (Communication Network Riser) - IDE Controller
Onboard Dual-Channel IDE Controller ATA133 (UDMA 133) - Multimedia:
AC97 v2.1 Codec Connectors on backpanel: Line-In, Line-Out, Mike Connectors onboard: Connector for frontpanel audio more inputs on the mainboard for CD-ROM and AUX. - Graphics-Controller
Northbridge with integrated UniChrome™ Graphics processor 128Bit-2D/3D accelerator - Networking:
10/100MBit Network-Controller onboard VIA VT6103 - Backpanel connectors:
1 x VGA 1 x PS/2 Mouse 1 x PS/2 Keyboard 1 x Parallel (SSP/EPP/ECP) 1 x Serial (COM) 1 x LAN 4 x USB 2.0 (2 further onboard) Audio: line-in (resp. rear), line-out (resp. Front), microphone (resp. center/bass) - Onboard connectors:
1 x Floppy drive (up to 2,88 MB) 2 x ATA133 2 x USB 2.0 (four further on backpanel) 1 x CD-Audio-in 1 x AUX 1 x Audio connector (2x5 pins + 4 pins for center/bass) 2 x Fan (CPU, Case) - Memory:
2 x 184-Pin DIMM Slots for PC1600 (DDR200), PC2100 (DDR266) or PC2700 (DDR333) unbuffered DDR SDRAM memory with 2,5 Volt and with 100, 133 or 166MHz clock frequency up to 2GB capacity - BIOS
AMI PnP BIOS stored in 2MBit Flash memory chip Bootable from floppy, ATAPI, USB and SCSI - ATX power supply connector
Standard 20-Pin-ATX power supply connector - Form Factor
MicroATX: 20 x 23 cm
Print version of this page: http://eu.shuttle.com/mk40vn.htm
Shuttle Computer - European Headquarters - All rights reserved - Date:
30.4.2008
|