Path: HomeProductsXPCSN45G/V2Mainboard FN45

XPC SN45G and SN45GV2

   
  • Mini-Aluminium-Barebone-System with Socket A
  • Supports Athlon XP/Duron with 200/266/333/400FSB
    also supports Barton-core up to 3200+
  • Chipset: nVidia nForce2 Ultra 400
  • Low loise with ICE-Heatpipe-Cooling
  • 1x AGP (8X), 1x PCI (for simultaneous use)
  • 2x DDR400/333/266/200 Dual-Channel-Support, 
  • 6x USB 2.0, 6-Ch-Audio, LAN, Firewire and much more
  • New: SN45GV2 with Silent-X 250W power supply

   

 

Mainboard FN45


Mainboard FN45 only available in conjunction with XPC SN45G

  • Chipset:
    NVidia nForce2 Ultra 400
    Southbridge: MCP-T
  • Processor-Support
    Socket 462 (Socket A) CPU Support
    AMD Athlon XP and Duron Processor for Socket A with 400/333/266/200MHz FSB
    also supports Athlon XP with Barton-core up to 3200+
    Burn Proof CPU protection only for AthlonXP  (automatic power off if overheated)
    Interesting for Overclockers:
    FSB-adjustments: 100MHz, 102-123MHz, 125MHz, 127-148MHz, 150MHz, 152-175MHz,
    177-200MHz, 202-211MHz, 213-223MHz, 225MHz, 227-250MHz
    Multiplier-Adjustments: 8,0 up to 23,0 in 20 steps
    Expansion Slots:
    1 x AGP (v3.0) slot supports 8X and 4X mode
    Important Note: AGP-Slot only supports 1,5V graphics cards
    1 x 32 Bit PCI (v2.2)
    AGP- and PCI-Slot are designed for simultaneous use
  • IDE-Interface
    Onboard IDE Controller with 2x ATA133-connectors
  • Multimedia:
    AC97 v2.2 Realtek ALC650 soundfunction with 6-Kanal-Support
    Connectors on the backpanel: bass/center, line-out (front-out), rear-out
    Connectors on the frontpanel: microphone and line-in/out
    Onboard: Audio-in for CD-ROM and AUX.
  • Networking:
    10/100MBit LAN with RJ45-connectors on the backpanel
    Realtek 8201BL chipset
  • 1394 Firewire
    Firewire-Controller Realtek 8801
    with 3x 1394 connectors (2x backpanel, 1x frontpanel)
    supports 400/200/100 Mbit/s transfer rate
  • Backpanel-connectors:
    1 x PS/2-Mouse
    1 x PS/2-Keyboard
    1 x Serial
    2 x USB 2.0 (4 more onboard)
    2 x Firewire (IEEE1394, one more connector onboard)
    1 x  Network RJ45
    Audio: 3 connectors for 6-channel operation (bass/center, front, rear)

    SN45G: optical SPDIF-in and out are led to the outside on the rear of the case.
  • Onboard-connectors:
    1 x Floppy drive (up to 2,88 MB)
    4 x USB 2.0 (two more on the backpanel)
    1 x SPDIF-in
    1 x SPDIF-out
    1 x Infrarot
    1 x Firewire (IEEE1394, two more on the backpanel)
    3 x Audio frontpanel connectors (microphone and line-in/out)
    1 x CDROM Audio-in
    3 x Fan (CPU, AGP, Case)
    1 x Parallelport
  • Memory:
    2 x 184-Pin for PC3200 (DDR400), PC2700 (DDR333), PC2100 (DDR266) or PC1600 (DDR200) unbuffered DDR SDRAM memory
    with 200, 166, 133 or 100MHz clock frequency 2GB capacity, Dual-Channel-Support
    no support of buffered or ECC-modules
  • Hardware-monitoring
    CPU-temperature, system voltage and fan revolution
    AutoGuardian-function for revolution regulating
  • Power Management
    ACPI Version 1.0 (Advanced Configuration and Power Interface)
    supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
    On/Off-button with two functions: Suspend-mode / soft-off
  • BIOS
    Award V6.0PG PnP Green BIOS
    stored in 2MBit Flash-memory chip
  • ATX-power supply connector
    SN45G: 200W, SN45GV2: Silent-X 250W Info
    Standard 20-Pin-ATX-power supply connector + 4-pins
  • Form Factor
    Flex/MicroATX: 25,4 x 18,5 cm
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits

 


Print version of this page: http://eu.shuttle.com/fn45.htm
Shuttle Computer - European Headquarters - All rights reserved - Date: 30.4.2008