Path: HomeProductsMainboardsSocket 478VIA-chipsetAV45GT/RVersions

Mainboard AV45GT, AV45GTR

Distinguishing Marks of the Versions

Version Comparision

AV45GTR (Version 1.x)
Chipset: P4X266A, VT8233
Active Northbridge-Cooler
6x USB 1.1
AV45GT2R (Version 2.x)
Chipset: P4X266A, VT8233A
Passive Northbridge-Cooler
4x USB 1.1 and 4x USB 2.0

 

AV45GTR
with RAID-Option
AV45GT
without RAID-Option

Specification

  • Chipset
    VIA P4X266A for Pentium 4 processors with socket 478
    Northbridge: VIA VT8753A (with passive-fan), Southbridge VIA VT8233
  • Socket 478 CPU Support
    Intel Pentium 4 processor with Willamette- or Northwood-core
    with 400MHz FSB and from Board-Version 1.3 on even with 533MHz FSB
    successfully tested with: P4 Celeron up to 1,8 GHz, P4 (Willamette 256KB Cache) up to 2,2GHz,
    P4 (Northwood 400MHz FSB) up to 2,4GHz and P4 (Northwood 533MHz FSB) up to 2,8GHz
    Normally, there is no need to configure the processor.
    In BIOS the following parameters can also be adjusted manually:
    - FSB-frequency infinitely adjustable from 100 up to 160 MHz
    - Vcore CPU-voltage fine adjustment: 1,100 up to 1,850V
    - DDR-voltage: 2,55 / 2,60 / 2,65V
  • Expansion Slots
    1 x AGP (v2.0) slot supports 4X mode
    5 x 32 Bit PCI (v2.2)
  • Onboard IDE Controller
    2-Channel Enhanced PCI IDE for up to 4 IDE devices
    supports UltraDMA/100 (ATA100)

  • Only AV45GTR: IDE RAID Controller, UDMA/133
    Chip: High Point 372, supports UltraDMA/133
    supports RAID-Modes 0 and 1 (even simultaneously)
    with two IDE-connectors for up to 4 hard disks
  • Integrated Multichannel Hardware Audio Function:
    C-Media 8738 Hardware-Audio-Controller
    supports 5.1 sound, C3DX Positional Audio in 6-channel-speaker-mode
    HRTF-3D Positional Audio, supports Direct Sound 3D and A3D-interface
    applicable to Legacy SBPRO
    Connectors on the backpanel: line-in, line-out, microphone, MIDI/gameport, line in/out
    Connector on the bracket: for bass/center, bracket optionally in delivery
    Multichannel operation: line-out = front, line-in = rear and onboard connector for bass/center
    More line-ins on the mainboard audio-in for CD-ROM and AUX.
  • Backpanel-connectors
    1 x PS/2-Mouse
    1 x PS/2-Keyboard
    1 x Parallel (SSP/EPP/ECP)
    2 x Serial (16550 compatible, Fifo)
    2 x USB (four more onboard)
    Audio: line-in, line-out, microphone, MIDI/gameport
  • Onboard-connectors
    1 x Floppy drive (up to 2,88 MB)
    4 x USB (additional)
    1 x Infrared (COM2 can be used for infrared communication, IrDA-adapter not included in delivery)
    1 x WOL (Wake on Lan)
    4 x Fan (CPU, AGP, chipset)
  • Memory
    3 x 184-Pin DIMM-socket for PC1600 or PC2100 DDR SDRAM memory
    supports modules sizes of 64, 128, 256, 512 and 1024MB
    with 100 or 133MHz clock frequency up to a total capacity of
    either 2GB unbuffered or 3GB registered DDR SDRAM.
  • Hardware-monitoring
    CPU-temperature, system voltage and fan revolution can be monitored
  • Power Management
    ACPI Version 1.0 (Advanced Configuration and Power Interface)
    supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S5 (Soft-Off)
    On/Off-button with two functions: Suspend-mode / soft-off
  • BIOS
    Award V6.0PG  PnP Green BIOS
    2 MBit Flash EPROM
  • ATX-power supply connector
    Standard 20-Pin-ATX-power supply connector
    Additional 4-Pin-connector for 12V
    Additional 6-Pin-connector for 3,3 and 5V
  • Accessories
    Mainboard with active Northbridge-cooler, IDE-cable, floppy cable, detailed manual, bracket-adapter for bass/center and USB, driver CD-ROM
  • Form Factor
    ATX: 30,5 x 24,4 cm

 


Print version of this page: http://eu.shuttle.com/av45.htm
Shuttle Computer - European Headquarters - All rights reserved - Date: 30.4.2008