Path: HomeProductsMainboardsSocket 478SiS-ChipsetAS45GT/GTRSpecification

Mainboard AS45GT, AS45GTR


 

Specification

  • Chipset
    SiS648 for Pentium 4 processors with socket 478
    Northbridge: SiS648 and Southbridge: SiS963
  • Socket 478 CPU support
    Intel Pentium 4 processor (Willamette or Northwood) and P4 Celeron
    with 400MHz or 533MHz FSB (100 resp. 133MHz Quad-Datarate-Process)
    successfully tested with: P4 Celeron up to 1,8 GHz, P4 (Willamette 256KB Cache) up to 2,2GHz,
    P4 (Northwood 400MHz FSB) up to 2,5GHz and P4 (Northwood 533MHz FSB) up to 2,8GHz
  • Expansion Slots
    1 x AGP Pro slot supports 8X mode
    5 x 32 Bit PCI (v2.2)
  • Onboard IDE Controller
    2 Channel Enhanced PCI IDE-Controller for up to 4 IDE devices
    supports UltraDMA/133 (ATA133)
  • AS45GTR only: ATA133-RAID-Controller
    2 Channel RAID-Controller High Point 372 for up to 4 IDE devices
    supports UltraDMA/133 (ATA133)
    supports RAID-modes 0, 1 and 0+1
  • AS45GTR only: Serial-ATA-Controller
    2x Marvell 88i8030 Serial ATA Controller
    supports 2 hard disks with Serial-ATA-interface
    for a transfer rate up to 1,5Gbit/s 

    Caution: The picture serves to compare both interfaces only.
    Only one operation mode each can be run simultaneously on the RAID-controller:
    either Serial-ATA or IDE with Parallel-cable. 
  • Integrated Multichannel Audio Function:
    onboard Realtek ALC650 6 channel audio function
    conforming to specification AC'97 v2.2
    Connectors on the backpanel: line-in, line-out, microphone, MIDI/gameport, line in/out
    Connectors on the bracket: for bass/center, bracket optionally included in delivery
    Connectors onboard: Audio-in for CD-ROM, AUX, SPDIF
  • Backpanel-connectors (standard-panel)
    1 x PS/2-Mouse
    1 x PS/2-Keyboard
    1 x Parallel (SSP/EPP/ECP)
    2 x Serial (16550 compatible, Fifo)
    2 x USB 2.0 (four more onboard)
    Audio: line-in, line-out, microphone, MIDI/gameport
  • Onboard-connectors
    1 x Floppy drive
    4 x USB 2.0 (additional to both backpanel-connectors)
    3 x Firewire IEEE1394 (optionally with bracket and 2 connectors)
    1 x CD-in and 1 x AUX
    1 x SPDIF
    3 x Fan (CPU, AGP, Chipset)
  • Memory
    3 x 184-pin DIMM-Socket
    for PC1600 (DDR200), PC2100 (DDR266) or PC2700 (DDR333) DDR SDRAM memory
    supports module sizes of 128, 256, 512 and 1024MB
    supports 6 banks with 100, 133 or 166MHz clock frequency up to 3GB capacity
  • Hardware-monitoring
    CPU-temperature, system voltage and fan revolution can be monitored
  • Overclocker-friendly
    CPU-Clock: 100...165MHz in 1MHz-steps
    CPU-Clock ratio: 10...24
    CPU/DRAM-Clock ratio: 1:1, 3:4, 3:5, 1:2
    CPU Vcore: 1,1 ... 1,825V and above 1,85V: 1,85 ... 2,40V
    Vdimm = 2,55 ... 2,75V
    with two practical onboard-buttons for reset and power
  • BIOS
    Award/Phoenix-BIOS auf 2 MBit Flash EPROM
    IRQ-adjustment automatically or manually possible
  • ATX-power supply connector
    Standard 20-pin-ATX-power supply connector
    Additional 4-pin-connector for 12V
    Additional 6-pin-connector for 3,3 and 5V
  • Form Factor
    ATX: 30,5 x 24,4 cm
  • Accessories
    Mainboard, driver-CD, IDE- and Floppy-cable, bracket adapter for USB (optional), firewire and audio (center/bass)
    The Raid-Version AS45GTR contains: manual for RAID-controller (optional), a Serial-ATA cable and an additional IDE-cable.

Versions of the AS45GT/R

AS45GTR
with Serial-ATA/IDE RAID
AS45GT
without Serial-ATA/IDE RAID


Print version of this page: http://eu.shuttle.com/as45.htm
Shuttle Computer - European Headquarters - All rights reserved - Date: 30.4.2008