Path: HomeProductsMainboardsSocket AAK322, AK32A, AK32EVersions

Mainboard AK322 (AK32L), AK32A, AK32E


 AK322 (also AK32L), AK32A
(delivered with passive chipset-cooling)
AK32E New!


AK322/AK32A (Ver. 2.x) with 5 PCI-Slots
delivered with passive chipset-cooling

Differences between the Versions AK322, AK32A and AK32E

Version AK322 (also AK32L) AK32A AK32E New!
Northbridge VIA KT266 VIA KT266A VIA KT266A
Southbridge VIA VT8233 VIA VT8233 VIA VT8235
USB/IDE USB 1.1 / ATA-100 USB 1.1 / ATA-100 USB 2.0 / ATA-133
Sticker
on
Parallelport
BIOS AK32S2xx AK32S3xx AK32SExx
Sticker
on
Package
Version-
number
(onboard)

 

Specification

  • Chipset
    Version AK322 AK32A AK32E
    Northbridge VIA KT266  VIA KT266A VIA KT266A
    Southbridge VIA VT8233 VIA VT8233 VIA VT8235

    Note: All board-versions were delivered with passive Northbridge-cooling.

  • Socket A CPU Support
    supports the following 462Pin socket A processors:
    AMD Athlon/XP with 266 or 200MHz FSB
    supports Palomino (model 6) and T-Bred (model 8)
    AMD Duron/Morgan with 200MHz FSB
    successfully tested with: Duron up to 1,3GHz / Athlon up to 1,4GHz / Athlon XP up to 2600+ with 266MHz FSB
    Adjustable in BIOS:
    FSB: 100...166MHz in 1MHz-steps
    Vcore: -0,025V to +0,275V, max. voltage up to: 1,85V
  • Expansion Slots
    1 x A.G.P. (4X mode), 3,3V
    5 x 32 Bit PCI
  • Onboard IDE Controller
    2-channel Enhanced PCI IDE for up to for 4 IDE devices
    supports up to UltraDMA/100 (downward compatible)
    AK32E supports also UltraDMA/133
    with ATA-133-cable
  • Hardware monitoring
    CPU-temperature, system voltage and fan revolution can be monitored
  • More interfaces
    Back panel:

    1 x PS/2-Mouse
    1 x PS/2-Keyboard
    1 x Parallel (SSP/EPP/ECP)
    2 x Serial (16550 compatible, Fifo)
    2 x USB (four more connectors onboard)
    1 x Line-in
    1 x Line-out
    1 x Microphone
    1 x MIDI/Joystick-connector
    Onboard:
    1 x Floppy drive
    1 x Infrared (IrDA-adapter not included in delivery)
    1 x WOL (Wake on Lan)
    2 x USB (two more connectors on the back panel)
    3 x Fan (CPU, AGP-card, Northbridge-Chip, case)
    3 x Audio (CD-Audio-in, TAD, AUX)
    Note:
    AK322/AK32A support USB 1.1
    AK32E/AK32V support USB 2.2
  • Memory
    2 x 184-Pin DDR DIMM-socket 
    for DDR SDRAM PC-1600/2100
    with 64, 128, 256, 512 and 1024 MB
    2 x 168-Pin SDR DIMM-socket 
    for SDR SDRAM PC-100/133
    Total memory capacity: up to 2 GB
    Use either SDR- or DDR-memory only.
    At 100MHz System frequency, the memory frequency can also be adjusted pseudo-asynchronously to 133MHz.
  • Soundfunction
    Software-audio with AC'97 2.1 conforming CODEC onboard
  • Power Management
    Power saving modes: Doze, Standby and Suspend
    ACPI (Advanced Configuration and Power Interface)
    Power on via modem, timer, ethernet (WOL), PCI-card
    On/off-button with two functions: Suspend-saving mode / soft-off
    State after power failure: auto/off
  • BIOS
    2 MBit Flash EPROM
    Award BIOS V6.0PG
    supports Green PC, Desktop Management Interface (DMI)
  • Form Factor
    ATX: 24,5 x 30,5 cm

 


Print version of this page: http://eu.shuttle.com/ak322.htm
Shuttle Computer - European Headquarters - All rights reserved - Date: 30.4.2008