Path: HomeProductsMainboardsSocket AAK12/AVersions
Mainboard AK12, AK12A
Version Marks AK12/AK12A The stickers with the version numbers can be found on various places. Mainboard | AK12 | AK12A (also: AK123 o. AK12 V3.0) | Mark (see picture) | Board-Version 1.1 LOT/BOM 11...15 Ser.-Nr: AK12.... | Board-Version 3.0 LOT/BOM from 31 Ser.-Nr: AK12A.... | Northbridge (determines FSB-frequency) | VIA KT133 / VT8363 supports 200MHz FSB (100MHz Bus frequency) | VIA KT133A / VT8363A supports 266MHz FSB (133MHz Bus frequency) | Southbridge (hold IDE-controller) | VIA VT82C686A supports ATA-66 or VIA VT82C686B supports ATA-100 | VIA VT82C686B supports ATA-100 | Specification - Chipset of AK12 (Version 1.x)
VIA Apollo KT133 chipset Northbridge: VIA VT8363 (supports 200MHz FSB) Southbridge: VIA VT82C686A (ATA-66) or VT82C686B (ATA-100) - Chipset of AK12A (Version 3.x)
VIA Apollo KT133A chipset Northbridge: VIA VT8363A (supports 266MHz FSB) Southbridge: VIA VT82C686B (supports ATA-100) - Socket A CPU Supports
supports 462Pin socket A processors AMD-Processor | Mainboard AK12 | Mainboard AK12A | Athlon XP T-Bred | no | up to 2400+ from BOM36 *) | Athlon XP Palomino and Duron with Morgan-Core | no | up to 2100+ from BOM36 *) | Athlon-C 266MHz FSB | no | 1000 ... 1333+ MHz 1400 MHz from BOM33 *) | Athlon 200MHz FSB | 650 ... 1300+ MHz | 650 ... 1300+ MHz 1400 MHz from BOM33 *) | Duron (Morgan) | no | 1000 ... 1300 MHz | Duron | 550 ... 950+ MHz | 550 ... 950 MHz | On the left: Palomino (Modell 6), on the right: Thoroughbred (T-Bred, Modell 8) *) LOT resp. BOM-sticker, see picture above Automatic adjustment of the CPU Vcore-voltage AK12: Manual adjustment of the Bus frequency in BIOS-setup from 100 up to 112MHz in 10 steps possible - Expansion Slots
1 x A.G.P. (4X mode), 3,3V 5 x 32 Bit PCI (all Busmasters) 1 x AMR (Audio Modem Riser) - Onboard IDE Controller
2-Kanal Enhanced PCI IDE for up to 4 IDE devices The board-version featuring the South-Bridge-Chip VT82C686A supports up to UltraDMA/66 The board-version featuring the South-Bridge-Chip VT82C686B supports up to UltraDMA/100 Delivery with ATA-100-cable - Hardware monitoring
for voltage, temperature and fan - More interfaces
1 x Floppy drive (up to 2,88 MB) 1 x Parallel (SSP/EPP/ECP) 2 x Serial (16550 compatible, Fifo) 4 x USB 1 x Infrared (IrDA-adapter not included in delivery) 1 x PS/2-Mouse 1 x PS/2-Keyboard 1 x WOL (Wake on Lan) 1 x WOM (Wake on Modem) - Memory
3 x 168-Pin DIMM-socket for up to 1,5 GB memory SDRAM or VCM with 16, 32, 64, 128, 256 and 512 MB size - Soundfunction
Software-Audio with AC'97 2.1 conforming CODEC onboard - Power Management
Power saving modes: Doze, Standby and Suspend ACPI (Advanced Configuration and Power Interface) supports Suspend to RAM power on via modem, timer, network, PCI-card automatic power on after power failure On/Off-button with two function: Suspend-mode / soft-off - BIOS
2 MBit Flash EPROM - Form Factor
ATX: 22 x 30,5 cm
Print version of this page: http://eu.shuttle.com/ak12.htm
Shuttle Computer - European Headquarters - All rights reserved - Date:
30.4.2008
|