Path: HomeProductsMainboardsSocket AAK11Versions
Mainboard AK11
Version Marks AK11 Mainboard AK11 | Version 2.2 | Version 3.2 | Onboard Imprint | | | CPU-Support with 200 and 266MHz FSB | Thunderbird and Duron | Athlon Thunderbird and Duron from BOM 34: Athlon XP and Morgan T-Bred is not supported! | Overclocking Features | Aktive Northbridge-cooler FSB infinitely variable 100...166MHz Vcore-adjustment | Aktive Northbridge-cooler FSB infinitely variable 100...166MHz Vcore-adjustment Multiplicator-adjustment Vio-/AGP-Spannungs-adjustment | Picture: see AK11 here with BOM/LOT-sticker "32" On the left: Palomino (Model 6), on the right: Thoroughbred (T-Bred, Model 8) Specification - Chipset
VIA Apollo KT133A chipset Northbridge: VIA VT8363A Southbridge: VIA VT82C686B - Socket A CPU support
supports the following 462Pin socket A processors: AMD Athlon XP up to 2100 and Morgan (from Board-Version 3.2 on BOM 34 = white sticker) Thoroughbred is not supported! AMD Athlon Thunderbird with 266MHz FSB: 1000 ... 1400+ MHz AMD Athlon Thunderbird with 200MHz FSB: 650 ... 1400 MHz AMD Duron with 200MHz FSB: 550 ... 950+ MHz Automatic adjustment of speed and voltage Manual adjustment of FSB-frequency in BIOS from 100...166MHz in 1MHz-steps VCore-voltage fine adjustment: decrease to 100mV or increase up to 275mV Overclocking-jumper- (from 100 to 133MHz FSB) and multiplicator adjustment possible AK11 V3.x additionally features the following adjustments in BIOS: multiplicator, Vio-voltage (3,3V), AGP-4X-voltage - Expansion Slots
1 x A.G.P. (4X mode), 3,3V 6 x 32 Bit PCI 1 x CNR (Communication/Network Riser) - Onboard IDE Controller
2-channel enhanced PCI IDE for up to 4 IDE devices supports up to UltraDMA/100 (downward compatible) with ATA-100-cable - Hardware monitoring
for voltage, temperature and fan - More interfaces
Backpanel: 1 x PS/2-Mouse 1 x PS/2-Keyboard 1 x Parallel (SSP/EPP/ECP) 2 x Serial (16550 compatible, Fifo) 2 x USB (two more connectors onboard) 1 x Line-in 1 x Line-out 1 x Microphone 1 x MIDI/Joystick-connector Onboard: 1 x Floppy drive 1 x Infrared (IrDA-Adapter not included in delivery) 1 x WOL (Wake on Lan) 2 x USB (two more connectors on the backpanel) 4 x Fan (CPU, AGP-Card, Northbridge-Chip, Case) 3 x Audio (CD-Audio-in, TAD, AUX) - Memory
3 x 168-Pin DIMM-Sockel for up to 1,5 GB capacity, PC100/PC133 SDRAM with 16, 32, 64, 128, 256 and 512 MB size - Soundfunction
Software-Audio with AC'97 2.1 conforming CODEC onboard - Power Management
Power saving modes: Doze, Standby and Suspend ACPI (Advanced Configuration and Power Interface) supports Suspend to RAM and Suspend to Disk power on via modem, timer, network (WOL), PCI-Card automatic power on after power failure (adjustable in BIOS) On/Off-button with two functions: suspend-mode / soft-off - BIOS
2 MBit Flash EPROM Award BIOS V6.0PG supports Green PC, Desktop Management Interface (DMI) - Form Factor
ATX: 22 x 30,5 cm
Print version of this page: http://eu.shuttle.com/ak11.htm
Shuttle Computer - European Headquarters - All rights reserved - Date:
30.4.2008
|