Bios Update History for Mainboard HOT-569
=========================================

Attention:
This file may not be up to date.
We are not liable for any damages caused by the bios-update.

1) Check programming voltage of EEPROM
   JP19 1-2: 12V (Intel -i- and MX Chips)
   JP19 2-3: 5V  (generally: others than Intel chips)
2) Do not load any memory manager.
3) Start DOS and execute: Flash533 <BIOS file>
4) After programming, turn off your system for a moment.


569WIQ05.BIN   : support 3.2V when power on

569WIQ07.BIN   : add HOLCO jumperless 

569WIQ09.BIN   : support new ITE 8679F,8680F ( Vresion F ) chip 

569WIQ0A.BIN   : 
             1  add AMD 233MHz support 2.2V
             2  DMI CPU speed 75MHz 83MHz
             3  USB_IRQ_SELECTABLE
             4  support ZIP_IOMEGA		
             5  fix 8GB HARDDISK			
             6  COM4 for IRQ10 
             7  auto detect DIMM/PCI clk                
             8  DMI support AMD 3D CPU
             9  support AMD 3D CPU

569WIQAA.BIN   : support NCR NEW SYMBIOS  

569WIQ0B.BIN : 
             1. support IDT 3D CPU.
             2. change AMD 3D CPU string from "AMD-K6 3D" to "AMD-K6(tm)-2".
             3. support Cyrix CPU.
             4. fix some net card (chipset UMC UM9008) can not login network when 
                first boot.	
             5.fix when COM2 set "2E8/IRQ10"  will hang up when power on

569WIQ0C.BIN :
             1. some SIMM plug in "bank0" will post fail 

569WIQ0D.BIN :
             1. fix 569WIQ0C.BIN enter "standard CMOS setup" feature will hang up
	  	
569WIQ0E.BIN :
             1  fix Y2K RTC test fail
             2  support AMD K6-3 CPU ,string "AMD-K6(tm)-III"
             3  support MII CPU
             4  support IDT w-chip2 CPU		
             5  support PIIX4 E versio chipset
             6  COM2 set "2E8/IRQ10" will hang up in POST
             7  some LAN card (UMC  UM9008F) can't login network whem first poer on